Shimano NEXUS CS-C7000 Manual del Concesionario - Página 21

Navegue en línea o descargue pdf Manual del Concesionario para Bicicleta Shimano NEXUS CS-C7000. Shimano NEXUS CS-C7000 48 páginas.

Installation/removal

Installing the disc brake rotor

5 screw type (with lock washers)

Temporarily secure the disc brake rotor and the disc brake rotor lock washers to the hub as shown in the

figure.

Fit the lock washers so that the marking "TOP" is visible.

Ensure that the hooked part of the lock washer is securely caught on the notch in the disc brake

rotor, then tighten on the lock washer with the disc brake rotor mounting screw. If tightened while

the hooked parts are against the surface of the disc brake rotor, the lock washers and its hooked

parts will become deformed.

Hooked part of lock washer

Notch in disc brake rotor

The lock washers are not reusable. Always use new lock washers when installing the disc brake

rotor.

Use the dedicated disc brake rotor mounting screws.

Lock washer

2 - 4 N·m

Disc brake rotor mounting

screw