Digital Control Systems AirSense 310en Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios Digital Control Systems AirSense 310en. Digital Control Systems AirSense 310en 19 páginas. Infrared environmental co2 sensor

Imprimir página

Installation

3.20"
2.10"
1.60"
1.10"
0.00"
Figure 1: AirSense Model 310en Mounting Dimensions

Cover Removal

To open the Model 310en use a coin in the slot on the
bottom to release the snap. Lift the cover up slightly to
disengage the closure and remove cover with a downward
motion to clear the catch at the top of the unit.
The locations of controls and terminals on the main circuit
board are shown in the Figure 2 on page 5.

Mounting

The Model 310en is designed for flush mounting with two
fasteners. The locations of the mounting points (shown in
Figure 1) allow direct mounting on a standard simplex
(single circuit) junction box. There is a wiring cutout in the
center of the unit near the terminal strips.
3/9/15
AirSense Model 310en Operator's Manual
Digital Control Systems
www.dcs-inc.net • 503/246-8110
4
Page: