Bitstorm Bad Boy Xtreme BB-XAPC75 Manual de instalación y funcionamiento - Página 5
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Antena Bitstorm Bad Boy Xtreme BB-XAPC75. Bitstorm Bad Boy Xtreme BB-XAPC75 17 páginas.
Imprimir páginaBitstorm Inc.
Step 4
Remove bottom cover from Xtreme and plug in 75 ft (23m) black cable. Plug
other end of cable into POE Adapter Port 1. See illustration previously for
location. Note: Xtreme requires power to operate and should be connected
to Port 1 which always supplies power.
Caution: Do not connect anything other than Bitstorm BAD BOY devices
to Port 1.
Step 5
Plug patch cable (included in kit) into Port 2 of the DUO. Connect other end
to computer, networking devices or optional Unleashed. Observe that the
green LAN LED illuminates on Xtreme.
Note: If using a computer or networking device, ensure Port 2 green
power LED is NOT lit.
Step 6
Continue to Chapter 3 - Operation. Surf the web to verify your system is
operating correctly. If not, check troubleshooting section in the back of this
guide. (Appendix F - Troubleshooting).
Proceed with remainder of installation only after correct operation has
been determined.
www.bitstorm.com
Bad Boy Xtreme
5