Bitstorm Bad Boy Xtreme BB-XAPC75 Installation And Operation Manual - Page 5

Browse online or download pdf Installation And Operation Manual for Antenna Bitstorm Bad Boy Xtreme BB-XAPC75. Bitstorm Bad Boy Xtreme BB-XAPC75 17 pages.

Print Page

1. Chapter 2 - Installation

Bitstorm Inc.

Step 4



Remove bottom cover from Xtreme and plug in 75 ft (23m) black cable. Plug

other end of cable into POE Adapter Port 1. See illustration previously for

location. Note: Xtreme requires power to operate and should be connected

to Port 1 which always supplies power.

Caution: Do not connect anything other than Bitstorm BAD BOY devices

to Port 1.

Step 5



Plug patch cable (included in kit) into Port 2 of the DUO. Connect other end

to computer, networking devices or optional Unleashed. Observe that the

green LAN LED illuminates on Xtreme.

Note: If using a computer or networking device, ensure Port 2 green

power LED is NOT lit.

Step 6



Continue to Chapter 3 - Operation. Surf the web to verify your system is

operating correctly. If not, check troubleshooting section in the back of this

guide. (Appendix F - Troubleshooting).

Proceed with remainder of installation only after correct operation has

been determined.

www.bitstorm.com

Bad Boy Xtreme