Siemens SIMATIC ET 200AL Manual - Página 21

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 38 páginas. 10-link digital output module dq 8x24vdc/2a 8xm12
También para Siemens SIMATIC ET 200AL: Manual (50 páginas), Manual (38 páginas), Manual (32 páginas), Manual (37 páginas), Manual de equipamiento (46 páginas), Manual (26 páginas), Manual de equipamiento (28 páginas), Manual de equipamiento (27 páginas), Manual (25 páginas)

Imprimir página

4.2

Explanation of the parameters

Diagnostics: No supply voltage 2L+

Enabling of the diagnostics for no or insufficient supply voltage 2L+.

Diagnostics port

This parameter enables the diagnostics for the selected port.

The diagnostics possible depends on the IO-Link device in use. Additional information about

the diagnostic interrupts can be found in the description of the utilized IO-Link device.

Input / output type

This parameter sets the maximum length of the input and output data of the module.

Port configuration without S7-PCT

This parameter releases the port configuration without S7-PCT for the module.

Port Qualifier Information

This parameter releases the Port Qualifier Information (PQI).

The PQI provides information on the device status of the port and IO-Link.

Operating mode

This parameter determines the mode in which the selected port should be operated.

You can select from the following options:

● IO-Link autostart

● IO-Link manual

● DI

● DQ

● Disabled

IO-Link autostart

The connected IO-Link device starts automatically (Plug&Play functionality). The IO-Link

device is immediately ready for operation.

Communication module CM 4xIO-Link 4xM12(6ES7147-5JD00-0BA0)

Manual, 10/2017, A5E32352322-AE

Parameters/address space

4.2 Explanation of the parameters