Siemens SIMATIC ET 200AL Manual - Página 23

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 38 páginas. 10-link digital output module dq 8x24vdc/2a 8xm12
También para Siemens SIMATIC ET 200AL: Manual (50 páginas), Manual (38 páginas), Manual (32 páginas), Manual (37 páginas), Manual de equipamiento (46 páginas), Manual (26 páginas), Manual de equipamiento (28 páginas), Manual de equipamiento (27 páginas), Manual (25 páginas)

Imprimir página
Siemens SIMATIC ET 200AL Manual
Port configuration
You can use a CM 4xIO-Link 4xM12 communication module as of firmware version V1.1 to
commission the IO-Link ports of the IO-Link master or the connected IO-Link devices in two
different ways:
● Port configuration without S7-PCT
● Port configuration with S7-PCT
Port configuration without S7-PCT
Requirement
You have enabled the check box "Port configuration without S7-PCT" for the configuration of
the IO-Link master in STEP 7.
Procedure
You configure the IO-Link master directly in STEP 7:
● Enabling of the diagnostics
● Configuration of the I/O data lengths per port
● Enabling of the Port Qualifier Information (PQI)
● Port mode:
– Operation in "IO-Link autostart" mode (default)
– Operation in "IO-Link manual" mode
– Operated as DI
– Operated as DQ
– Disabled
Port configuration with S7-PCT
Requirement
You have disabled the check box "Port configuration without S7-PCT" for the configuration of
the IO-Link master in STEP 7.
Procedure
You configure the port configuration of the IO-Link master using the port configuration tool
S7-PCT as of V3.2.
Communication module CM 4xIO-Link 4xM12(6ES7147-5JD00-0BA0)
Manual, 10/2017, A5E32352322-AE
Parameters/address space
4.2 Explanation of the parameters
23