Siemens SIMATIC NET Manual de instalación - Página 29

Navegue en línea o descargue pdf Manual de instalación para Equipamiento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 48 páginas. Network components bus terminal
También para Siemens SIMATIC NET: Manual de instrucciones (29 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones de montaje (6 páginas), Información sobre el producto (6 páginas), Manual de instalación (40 páginas), Manual de instalación (50 páginas), Manual de instalación (40 páginas), Manual de referencia (14 páginas), Manual de instalación (34 páginas), Manual de instrucciones (32 páginas)

Device Management

3.2 Configuring the Device

RJ45 Male

The DSR, DCD and DTR pins are connected together internally.

The CTS and RTS pins are connected together internally.

RI is not connected.

Communication Ports

Connect any of the available Ethernet ports on the device to a management switch

and access the RUGGEDCOM M2100F console and Web interfaces via the device's IP

address. For more information about available ports, refer to

(Page

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.

All configuration management is done via the RUGGEDCOM M2100F interface.

For more information about configuring the device, refer to the "RUGGEDCOMROS

Configuration Manual" associated with the installed software release.

DB9 Female

21)".

Name

Description

Ring Indicator

Comment

"Communication Ports

RUGGEDCOM M2100F

Installation Manual, 04/2022, C79000-G8976-1342-09