Siemens SIMATIC NET Installation Manual - Page 29

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 48 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (50 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Operating Instructions Manual (32 pages)

Print Page
Siemens SIMATIC NET Installation Manual
Device Management
3.2 Configuring the Device
RJ45 Male
a
The DSR, DCD and DTR pins are connected together internally.
b
The CTS and RTS pins are connected together internally.
c
RI is not connected.
Communication Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM M2100F console and Web interfaces via the device's IP
address. For more information about available ports, refer to
(Page
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM M2100F interface.
For more information about configuring the device, refer to the "RUGGEDCOMROS
Configuration Manual" associated with the installed software release.
20
Pin
DB9 Female
1
9
21)".
Name
Description
c
RI
Ring Indicator
Comment
 
"Communication Ports
RUGGEDCOM M2100F
Installation Manual, 04/2022, C79000-G8976-1342-09