Siemens SIMATIC NET APE1402 Manual de configuración - Página 18
Navegue en línea o descargue pdf Manual de configuración para Equipamiento industrial Siemens SIMATIC NET APE1402. Siemens SIMATIC NET APE1402 36 páginas. Application processing engine
Imprimir página
If you do not wish the RUGGEDCOM APE to receive these BPDUs, they may be
disabled in RUGGEDCOM RUGGEDCOM APE in the interface switch menu for the
RUGGEDCOM APE interface.
1.10.2
Example: RX15xx Services and WAN Networking
The following illustration shows how the RUGGEDCOM APE might be used in a more
complex situation in which it is routed as opposed to bridged. The use of internal ser-
ial ports, firewalls, and port forwarding is discussed.
Figure 1.4
In this scenario, the RUGGEDCOM APE is reached via a routed interface. This is ac-
complished by moving the RUGGEDCOM APE port onto its own VLAN, and creating a
point-to-point connection between it and the control module.
The figure shows six serial ports available on serial LM 3. In order to become net-
work-accessible, these ports must be configured as socket ports that allow incom-
ing calls on TCP ports 5001 (ser-3-1) through 5006 (ser-3-6). While any address on
the RX1500 control module may be used to connect the RUGGEDCOM APE to these
ports, switch.0001, switch.0002, and dummy0 addresses are recommended. In par-
ticular, dummy0 addresses are useful when router redundancy is implemented.
As in the previous scenario, devices on the 192.168.0.0/24 subnet are still available
to the RUGGEDCOM APE; however, in this scenario, they are available through rout-
ing.
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 12/2019, C79000-G8976-1121-05
1.10.2 Example: RX15xx Services and WAN Networking
Example Configuration
Overview
9