Siemens SIMATIC PCS 7 Manual - Página 36

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 39 páginas. Process control system, basis library readme v9.0 sp1 online
También para Siemens SIMATIC PCS 7: Manual de introducción (6 páginas), Manual del sistema (28 páginas), Manual de funciones (42 páginas), Manual de instrucciones (36 páginas), Léame (26 páginas)

Imprimir página

4 Parameterization

8. In the "Important parameters" step, modify the values to suit your application.

Also set telegram 20 and the desired IP address, as well as the subnet mask.

Figure 4-27

9. In the last step you will find the setting for the motor identification. Here, select

identification at standstill.

This will cause the drive to automatically perform motor identification with the

first switch-on command; it will switch off when finished. The drive will execute

the job only with the next positive switch-on command.

Figure 4-28

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021