Siemens SIMATIC PCS 7 Manual - Halaman 36

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 39 halaman. Process control system, basis library readme v9.0 sp1 online
Juga untuk Siemens SIMATIC PCS 7: Panduan Pengenalan (6 halaman), Manual Sistem (28 halaman), Manual Fungsi (42 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Bacakan Aku (26 halaman)

Halaman Cetak

4 Parameterization

8. In the "Important parameters" step, modify the values to suit your application.

Also set telegram 20 and the desired IP address, as well as the subnet mask.

Figure 4-27

9. In the last step you will find the setting for the motor identification. Here, select

identification at standstill.

This will cause the drive to automatically perform motor identification with the

first switch-on command; it will switch off when finished. The drive will execute

the job only with the next positive switch-on command.

Figure 4-28

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021