Siemens Simatic S7-300 Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial Siemens Simatic S7-300. Siemens Simatic S7-300 34 páginas. Automation systems, controlling a physical axis
También para Siemens Simatic S7-300: Manual (21 páginas), Instrucciones de uso (4 páginas), Instrucciones de uso (5 páginas), Manual (35 páginas), Primeros pasos (8 páginas), Primeros pasos (16 páginas), Descripción de la aplicación (24 páginas), Manual (18 páginas), Manual (32 páginas), Manual de instalación y hardware (20 páginas), Primeros pasos (32 páginas)

Input the IP address of the router in the IE browser address bar of the remote PC and then appear

the router setting interface, set the port mapping for PC, as shown below. If your PC does not use

the router to access Internet, then this step can be omitted.

The meaning of the above settings is that when the client ETH Adapter CN visit and access the

router's external network IP address of PC (this address is automatically resolved by the domain

name, you no longer cares about its change),router will automatically transfer this visiting to the

VCOMM virtual serial port software on the PC with IP address 192.168.1.108, port 8000

which is connected to the router

After setting, click "Restart Router" button or re-power the router to work with the new parameters.

Run the client software on the PC, as shown below, the domain name kollew.changeip.net has

been pointed to the external network IP address of the router.

- 25 -