Siemens Simatic S7-300 Gebruikershandleiding - Pagina 25

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Siemens Simatic S7-300. Siemens Simatic S7-300 34 pagina's. Automation systems, controlling a physical axis
Ook voor Siemens Simatic S7-300: Handmatig (21 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (5 pagina's), Handmatig (35 pagina's), Aan de slag (8 pagina's), Aan de slag (16 pagina's), Toepassing Beschrijving (24 pagina's), Handmatig (18 pagina's), Handmatig (32 pagina's), Installatie- en hardwarehandleiding (20 pagina's), Aan de slag (32 pagina's)

Input the IP address of the router in the IE browser address bar of the remote PC and then appear

the router setting interface, set the port mapping for PC, as shown below. If your PC does not use

the router to access Internet, then this step can be omitted.

The meaning of the above settings is that when the client ETH Adapter CN visit and access the

router's external network IP address of PC (this address is automatically resolved by the domain

name, you no longer cares about its change),router will automatically transfer this visiting to the

VCOMM virtual serial port software on the PC with IP address 192.168.1.108, port 8000

which is connected to the router

After setting, click "Restart Router" button or re-power the router to work with the new parameters.

Run the client software on the PC, as shown below, the domain name kollew.changeip.net has

been pointed to the external network IP address of the router.

- 25 -