Siemens SINAMICS G120 Primeros pasos - Página 6

Navegue en línea o descargue pdf Primeros pasos para Equipamiento industrial Siemens SINAMICS G120. Siemens SINAMICS G120 46 páginas. Using blocksize converters in marine applications
También para Siemens SINAMICS G120: Manual de instrucciones (32 páginas), Primeros pasos (30 páginas), Instrucciones de instalación del hardware (2 páginas), Instrucciones de instalación y manual del usuario (2 páginas), Instrucciones de instalación (2 páginas), Instrucciones de instalación (2 páginas), Instrucciones de uso Compact (32 páginas), Manual (42 páginas), Primeros pasos (50 páginas), Manual del dispositivo (34 páginas), Manual de instalación rápida (2 páginas), Descripción de la aplicación (50 páginas), Instrucciones de uso Compact (2 páginas), Manual (31 páginas), Manual de aplicaciones (34 páginas), Instrucciones de uso Compact (2 páginas), Instrucciones de uso Compact (2 páginas)

Safety information

This manual describes how you install a SINAMICS G120 converter with CU250S-2 Control

Unit and commission it.

What is the meaning of the symbols in the manual?

Firmware upgrade and downgrade

Options for upgrading and downgrading the firmware can be found on the Internet at

http://support.automation.siemens.com/WW/view/de/67364620

(http://support.automation.siemens.com/WW/news/en/67364620).

Transferring license terms of the OSS code to a PC

The inverter contains open-source software (OSS). The OSS license terms are saved in the

inverter.

Procedure

To transfer the OSS license terms from the inverter to a PC, proceed as follows:

1. Switch off the inverter power supply.

2. Insert an empty memory card into the card slot of the inverter. See also the sections:

– Tools to commission the converter (Page 33)

– Overview of the interfaces (Page 22)

3. Switch on the inverter power supply.

4. When you have switched on the power supply, wait 30 seconds.

During this time, the inverter writes the "Read_OSS.ZIP" file onto the memory card.

5. Switch off the inverter power supply.

6. Remove the card from the inverter.

7. Use a card reader and load the file to a PC.

You have then transferred the OSS license terms from the inverter to a PC.

An operating instruction starts here.

This concludes the operating instruction.

Converters with CU250S-2 Control Units

Getting Started, 10/2013, FW V4.6, A5E32899990B AA