Siemens SINAMICS G120 Primeros pasos - Página 8

Navegue en línea o descargue pdf Primeros pasos para Equipamiento industrial Siemens SINAMICS G120. Siemens SINAMICS G120 46 páginas. Using blocksize converters in marine applications
También para Siemens SINAMICS G120: Manual de instrucciones (32 páginas), Primeros pasos (30 páginas), Instrucciones de instalación del hardware (2 páginas), Instrucciones de instalación y manual del usuario (2 páginas), Instrucciones de instalación (2 páginas), Instrucciones de instalación (2 páginas), Instrucciones de uso Compact (32 páginas), Manual (42 páginas), Primeros pasos (50 páginas), Manual del dispositivo (34 páginas), Manual de instalación rápida (2 páginas), Descripción de la aplicación (50 páginas), Instrucciones de uso Compact (2 páginas), Manual (31 páginas), Manual de aplicaciones (34 páginas), Instrucciones de uso Compact (2 páginas), Instrucciones de uso Compact (2 páginas)

Safety information

1.1 General safety instructions

Danger to life through a hazardous voltage when connecting an unsuitable power supply

Death or serious injury can result when live parts are touched in the event of a fault.

• Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV-

Danger to life when live parts are touched on damaged devices

Improper handling of devices can cause damage.

Hazardous voltages can be present at the housing or exposed components on damaged

devices.

• Ensure compliance with the limit values specified in the technical data during transport,

• Do not use any damaged devices.

Danger to life through electric shock due to unconnected cable shields

Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected

cable shields.

• Connect cable shields and unused conductors of power cables (e.g., brake conductors)

Danger to life due to electric shock when not grounded

For missing or incorrectly implemented protective conductor connection for devices with

protection class I, high voltages can be present at open, exposed parts, which when

touched, can result in death or severe injury.

• Ground the device in compliance with the applicable regulations.

WARNING

(Protective Extra Low Voltage) output voltages for all connections and terminals of the

electronics modules.

WARNING

storage and operation.

WARNING

at least on one side to the grounded housing potential.

WARNING

Converters with CU250S-2 Control Units

Getting Started, 10/2013, FW V4.6, A5E32899990B AA