Siemens SINAMICS G120 Başlarken - Sayfa 8

Endüstriyel Ekipmanlar Siemens SINAMICS G120 için çevrimiçi göz atın veya pdf Başlarken indirin. Siemens SINAMICS G120 46 sayfaları. Using blocksize converters in marine applications
Ayrıca Siemens SINAMICS G120 için: Kullanım Talimatları Kılavuzu (32 sayfalar), Başlarken (30 sayfalar), Donanım Kurulum Talimatları (2 sayfalar), Kurulum Talimatları ve Kullanım Kılavuzu (2 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum Talimatları (2 sayfalar), Kompakt Kullanım Talimatları (32 sayfalar), Manuel (42 sayfalar), Başlarken (50 sayfalar), Cihaz Kılavuzu (34 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Uygulama Açıklaması (50 sayfalar), Kompakt Kullanım Talimatları (2 sayfalar), Manuel (31 sayfalar), Uygulama Kılavuzu (34 sayfalar), Kompakt Kullanım Talimatları (2 sayfalar), Kompakt Kullanım Talimatları (2 sayfalar)

Safety information

1.1 General safety instructions

Danger to life through a hazardous voltage when connecting an unsuitable power supply

Death or serious injury can result when live parts are touched in the event of a fault.

• Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV-

Danger to life when live parts are touched on damaged devices

Improper handling of devices can cause damage.

Hazardous voltages can be present at the housing or exposed components on damaged

devices.

• Ensure compliance with the limit values specified in the technical data during transport,

• Do not use any damaged devices.

Danger to life through electric shock due to unconnected cable shields

Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected

cable shields.

• Connect cable shields and unused conductors of power cables (e.g., brake conductors)

Danger to life due to electric shock when not grounded

For missing or incorrectly implemented protective conductor connection for devices with

protection class I, high voltages can be present at open, exposed parts, which when

touched, can result in death or severe injury.

• Ground the device in compliance with the applicable regulations.

WARNING

(Protective Extra Low Voltage) output voltages for all connections and terminals of the

electronics modules.

WARNING

storage and operation.

WARNING

at least on one side to the grounded housing potential.

WARNING

Converters with CU250S-2 Control Units

Getting Started, 10/2013, FW V4.6, A5E32899990B AA