Siemens SINAMICS G120 Instrucciones de uso Compact - Página 13

Navegue en línea o descargue pdf Instrucciones de uso Compact para Equipamiento industrial Siemens SINAMICS G120. Siemens SINAMICS G120 32 páginas. Using blocksize converters in marine applications
También para Siemens SINAMICS G120: Primeros pasos (46 páginas), Manual de instrucciones (32 páginas), Primeros pasos (30 páginas), Instrucciones de instalación del hardware (2 páginas), Instrucciones de instalación y manual del usuario (2 páginas), Instrucciones de instalación (2 páginas), Instrucciones de instalación (2 páginas), Manual (42 páginas), Primeros pasos (50 páginas), Manual del dispositivo (34 páginas), Manual de instalación rápida (2 páginas), Descripción de la aplicación (50 páginas), Instrucciones de uso Compact (2 páginas), Manual (31 páginas), Manual de aplicaciones (34 páginas), Instrucciones de uso Compact (2 páginas), Instrucciones de uso Compact (2 páginas)

3.4

Terminal strips on CU240E-2 Control Units

Terminal strips with wiring example

All terminals labelled with reference potential "GND" are connected internally in the inverter.

Reference potentials "DI COM1" and "DI COM2" are electrically isolated from "GND".

→ If, as shown above, the 24 V supply from terminal 9 is used to supply the digital inputs, then you

must connect "GND", "DI COM1" and "DI COM2" with one another.

Terminals 31, 32

Reference potential "GND IN" is electrically isolated from "GND". When an optional 24 V power supply

is connected at terminals 31, 32, even when the Power Module is disconnected from the line supply,

the Control Unit remains in operation. The Control Unit thus maintains the fieldbus communication, for

example.

→ at terminals 31, 32, only connect a power supply that is in accordance with SELV (Safety Extra Low

Voltage) or PELV (Protective Extra Low Voltage).

→ if you use a common external power supply for terminals 31, 32 and the digital inputs, you must

connect "GND" to "GND IN".

Terminals 3, 4

You may use the internal 10V power supply or an external power supply for the analog inputs.

and 10, 11:

→ If you use the internal 10 V power supply, you must connect AI 0- or AI 1- to GND.

Figure 3-4

Wiring example of the digital inputs with the internal inverter 24 V power supply

CU240B-2 and CU240E-2 Control Units

Compact Operating Instructions, 04/2015, A5E35792002B AA

3.4 Terminal strips on CU240E-2 Control Units

Installing