Siemens SINAMICS S120 Manual - Página 11

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SINAMICS S120. Siemens SINAMICS S120 41 páginas. Applications for cabinet modules, liquid-cooled
También para Siemens SINAMICS S120: Manual de instrucciones (20 páginas), Primeros pasos (32 páginas), Descripción breve (22 páginas), Manual (43 páginas), Instrucciones de instalación en armarios para aplicaciones de propulsión marina (28 páginas), Manual de aplicaciones (34 páginas), Manual de aplicaciones (46 páginas), Manual de instrucciones (22 páginas), Primeros pasos (32 páginas), Manual de instrucciones (21 páginas), Manual de ingeniería (30 páginas), Manual de puesta en servicio (20 páginas)

Imprimir página
Siemens SINAMICS S120 Manual
4 SINAMICS S120 Add-On Instructions
4.4.3
Input and Output Parameters
Table 4-8 Input Parameters
Variable Name
Vector_Speed_T352
ON_OFF1
OFF2
OFF3
RUN_SET_POINT
FAULT_RESET
RPM_SET_SPEED
MAX_RPM
MAX_CURRENT
MAX_TORQUE
USER_SETPOINT1
USER_SETPOINT2
USER_SETPOINT3
USER_SETPOINT4
Table 4-9 IN/OUT Parameters
Variable Name
DRV_CONTROL
DRV_STATUS
Table 4-10 Output Parameters
Variable Name
RTS
READY
ENABLED
SINAMICS S: Speed control of a S120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 92045369,
V4.0,
Data Type
Instance Data
BOOL
BOOL
BOOL
BOOL
BOOL
REAL
REAL
REAL
REAL
Integer
Integer
Integer
Integer
Data Type
ARRAY
ARRAY
Data Type
BOOL
BOOL
BOOL
08/2018
Description
ON_OFF1 Drive Enable (ON/OFF1)
1 = Enable Drive
0 = Ramp Down and Disable drive
Coast Stop Command
0 = OFF2 Immediate Disable
1 = No OFF2 Command
Fast Stop Command
0 = OFF3 Fast Ramp and Disable
1 = No OFF3 Command
Speed Setpoint Enable
0 = Setpoint Disabled
1 = Setpoint Enabled
Reset Active Fault(s)
0 = No Fault Reset
1 = Reset Fault on Rising Edge
Speed Setpoint in RPM
Speed at 100% Setpoint
Must be the same as P2000
Current Feedback 100% value
Can be Scaled to P2002 or % (100.0)
Torque Feedback 100% value
Can be Scaled to P2003 or % (100.0)
User Defined setpoint 0 to 16384
= 0 to 100% Value to Drive
User Defined setpoint 0 to 16384
= 0 to 100% Value to Drive
User Defined setpoint 0 to 16384
= 0 to 100% Value to Drive
User Defined setpoint 0 to 16384
= 0 to 100% Value to Drive
Description
Array of 6 integers referenced to the six output
words of the drive telegram
Array of 6 integers referenced to the six input
words of the drive telegram
Description
Ready to Start
Ready for Operation
Pulses are Enabled
11