Siemens SINAMICS S120 Manual de aplicaciones - Página 41

Navegue en línea o descargue pdf Manual de aplicaciones para Equipamiento industrial Siemens SINAMICS S120. Siemens SINAMICS S120 46 páginas. Applications for cabinet modules, liquid-cooled
También para Siemens SINAMICS S120: Manual de instrucciones (20 páginas), Primeros pasos (32 páginas), Manual (41 páginas), Descripción breve (22 páginas), Manual (43 páginas), Instrucciones de instalación en armarios para aplicaciones de propulsión marina (28 páginas), Manual de aplicaciones (34 páginas), Manual de instrucciones (22 páginas), Primeros pasos (32 páginas), Manual de instrucciones (21 páginas), Manual de ingeniería (30 páginas), Manual de puesta en servicio (20 páginas)

5.5

Step 3: Parameterizing the drive object

Note

DDS configurator

The DDS configurator in STARTER cannot be used for activating function modules in the drive

object of the Motor Modules Booksize connected in parallel.

Note

Loss of the parallel connection

Use of the DDS configurator in STARTER for activating function modules in the drive object of

the Motor Modules Booksize connected in parallel resets the type of the drive object to a

"Vector" drive object. The parallel connection is lost and the drive configuration is no longer

consistent with the existing drive configuration with Motor Modules Booksize connected in

parallel.

● Only parameterize the drive object of the Motor Module Booksize connected in parallel by

using the expert list.

● Perform the commissioning again from Step 1: Restoring the factory settings (Page 35).

Procedure

1. Call up the expert list in the drive object of the Motor Modules Booksize connected in parallel.

You will find more information about calling up the expert list in Chapter Step 2: Creating a

drive object (Page 37), item 1

2. Set the parameter p0010 "Drive commissioning parameter filter / Drv comm. par_filt" to 1 to

filter out the parameters for quick commissioning

Motor Modules Booksize parallel connection

Application Manual, 01/2020, 6SL3097-5BF00-0BP0

5.5 Step 3: Parameterizing the drive object

Commissioning