Siemens SINAMICS S120 Manual de aplicaciones - Página 39

Navegue en línea o descargue pdf Manual de aplicaciones para Equipamiento industrial Siemens SINAMICS S120. Siemens SINAMICS S120 46 páginas. Applications for cabinet modules, liquid-cooled
También para Siemens SINAMICS S120: Manual de instrucciones (20 páginas), Primeros pasos (32 páginas), Manual (41 páginas), Descripción breve (22 páginas), Manual (43 páginas), Instrucciones de instalación en armarios para aplicaciones de propulsión marina (28 páginas), Manual de aplicaciones (34 páginas), Manual de instrucciones (22 páginas), Primeros pasos (32 páginas), Manual de instrucciones (21 páginas), Manual de ingeniería (30 páginas), Manual de puesta en servicio (20 páginas)

Imprimir página
Siemens SINAMICS S120 Manual de aplicaciones
5.4

Step 2: Creating a drive object

Procedure
1. Open the expert list in the drive object of the Control Unit.
– In the project navigator, click on the "+" symbol before the entry "S120_CU320_2_DP".
– In the project navigator, click on the "+" symbol before drive "SERVO_02".
– Double-click on the entry "Expert list".
Figure 5-3
2. Set the parameter p0009 Device commissioning parameter filter / Dev comm par_filt to 1 to
put the Control Unit into the "Device configuration" state.
3. Set the parameter p0097 Select drive object type / Select DO type to 12 to create a drive
object of the type vector parallel connection.
4. Set the parameter p0009 Device commissioning parameter filter / Dev comm par_filt to 0 to
start the internal first device commissioning.
The Control Unit then reboots automatically.
You can track the status of the reboot in parameter r0002 Control Unit operating display / CU
op_display. At r0002 = 0 the reboot is complete
5. Back up the created configuration by saving it on the memory card (ROM) as follows:
Click the icon
Call the "Target device > Copy RAM to ROM" shortcut menu.
6. The message that the Control Unit CU320-2 must be restarted appears.
Proceed as follows:
– Switch off the 24 V of the Control Unit CU320-2.
– Wait for 3 seconds.
– Switch on the 24 V of the Control Unit CU320-2 again.
Motor Modules Booksize parallel connection
Application Manual, 01/2020, 6SL3097-5BF00-0BP0
Expert list
"Copy RAM to ROM"
- OR -
Commissioning
5.4 Step 2: Creating a drive object
37