Siemens SINAMICS S120 Manual Aplikasi - Halaman 39

Jelajahi secara online atau unduh pdf Manual Aplikasi untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 46 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Manual (41 halaman), Deskripsi Singkat (22 halaman), Manual (43 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

Halaman Cetak
Siemens SINAMICS S120 Manual Aplikasi
5.4

Step 2: Creating a drive object

Procedure
1. Open the expert list in the drive object of the Control Unit.
– In the project navigator, click on the "+" symbol before the entry "S120_CU320_2_DP".
– In the project navigator, click on the "+" symbol before drive "SERVO_02".
– Double-click on the entry "Expert list".
Figure 5-3
2. Set the parameter p0009 Device commissioning parameter filter / Dev comm par_filt to 1 to
put the Control Unit into the "Device configuration" state.
3. Set the parameter p0097 Select drive object type / Select DO type to 12 to create a drive
object of the type vector parallel connection.
4. Set the parameter p0009 Device commissioning parameter filter / Dev comm par_filt to 0 to
start the internal first device commissioning.
The Control Unit then reboots automatically.
You can track the status of the reboot in parameter r0002 Control Unit operating display / CU
op_display. At r0002 = 0 the reboot is complete
5. Back up the created configuration by saving it on the memory card (ROM) as follows:
Click the icon
Call the "Target device > Copy RAM to ROM" shortcut menu.
6. The message that the Control Unit CU320-2 must be restarted appears.
Proceed as follows:
– Switch off the 24 V of the Control Unit CU320-2.
– Wait for 3 seconds.
– Switch on the 24 V of the Control Unit CU320-2 again.
Motor Modules Booksize parallel connection
Application Manual, 01/2020, 6SL3097-5BF00-0BP0
Expert list
"Copy RAM to ROM"
- OR -
Commissioning
5.4 Step 2: Creating a drive object
37