Siemens SINAMICS S120 Manual Aplikasi - Halaman 40

Jelajahi secara online atau unduh pdf Manual Aplikasi untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 46 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Manual (41 halaman), Deskripsi Singkat (22 halaman), Manual (43 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

Commissioning

5.4 Step 2: Creating a drive object

7. A new drive object, e.g. Vector_03 appears in the project navigator.

This is the drive object for the Motor Modules Booksize connected in parallel.

Note

Drive object

The two Motor Modules Booksize are represented by a drive object for Motor Modules

Booksize connected in parallel.

8. In the project navigator, double-click "Configuration" under the drive object.

Check the configuration of the new drive object for the following information:

– The power unit type must contain the entry "Parallel connection".

– The rated current of the power unit must correspond to this value: 2·0.95·rated current of

– The rated power of the power unit must correspond to this value: 2·0.95·rated power of

If you do net get these values, repeat the commissioning from Step 1: Restoring the factory

settings (Page 35).

the type of the Motor Modules Booksize connected in parallel

Motor Modules Booksize parallel connection

Application Manual, 01/2020, 6SL3097-5BF00-0BP0