Siemens SINUMERIK 840D sl Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 33 páginas. Operator panel front: op 010s
También para Siemens SINUMERIK 840D sl: Instrucciones de actualización (4 páginas), Instrucciones de actualización (5 páginas), Manual de puesta en servicio (36 páginas), Instrucciones de actualización (3 páginas), Instrucciones de actualización (3 páginas), Manual del sistema (44 páginas), Manual de equipamiento (28 páginas), Manual de equipamiento (48 páginas), Manual de equipamiento (26 páginas), Manual de equipamiento (28 páginas)

Introduction

1.1

DNC (Direct Numeric Control) is a function block of the Motion Control Information System

(MCIS) and is used to integrate CNC and machine tools into the production system.

DNC is an NC program management and supply system for CNC controls for archiving and

transferring NC programs.

From MCIS DNC V2.4 and higher it is now also possible to connect controls equipped with

SINUMERIK Operate to a DNC server.

1.2

Precondition

In order to make use of DNC, various basic functions of the ePS Network Services are used.

The necessary users have to be registered to link machine and server.

You can find additional information in the "ePS Network Services Function Manual".

Procedure

MCIS DNC - Direct Numerical Control

Siemens Automation Parts

Operating Manual, 09/2011, 6FC5398-7DP20-1BA0

The control system has booted and the operating areas are displayed.

Select the "Program manager" operating area.

Press the "DNC" softkey.

The "DNC" window is opened and displays an overview of the NC

program data.