- ページ 7

産業機器 Siemens SINUMERIK 840D slのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SINUMERIK 840D sl 33 ページ。 Operator panel front: op 010s
Siemens SINUMERIK 840D sl にも：アップグレード手順 (4 ページ), アップグレード手順 (5 ページ), コミッショニング・マニュアル (36 ページ), アップグレード手順 (3 ページ), アップグレード手順 (3 ページ), システムマニュアル (44 ページ), 設備マニュアル (28 ページ), 設備マニュアル (48 ページ), 設備マニュアル (26 ページ), 設備マニュアル (28 ページ)

Introduction

1.1

DNC (Direct Numeric Control) is a function block of the Motion Control Information System

(MCIS) and is used to integrate CNC and machine tools into the production system.

DNC is an NC program management and supply system for CNC controls for archiving and

transferring NC programs.

From MCIS DNC V2.4 and higher it is now also possible to connect controls equipped with

SINUMERIK Operate to a DNC server.

1.2

Precondition

In order to make use of DNC, various basic functions of the ePS Network Services are used.

The necessary users have to be registered to link machine and server.

You can find additional information in the "ePS Network Services Function Manual".

Procedure

MCIS DNC - Direct Numerical Control

Siemens Automation Parts

Operating Manual, 09/2011, 6FC5398-7DP20-1BA0

The control system has booted and the operating areas are displayed.

Select the "Program manager" operating area.

Press the "DNC" softkey.

The "DNC" window is opened and displays an overview of the NC

program data.