Siemens SINUMERIK 840D sl Manual de equipamiento - Página 31

Navegue en línea o descargue pdf Manual de equipamiento para Equipamiento industrial Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 48 páginas. Operator panel front: op 010s
También para Siemens SINUMERIK 840D sl: Instrucciones de actualización (4 páginas), Instrucciones de actualización (5 páginas), Manual de instrucciones (33 páginas), Manual de puesta en servicio (36 páginas), Instrucciones de actualización (3 páginas), Instrucciones de actualización (3 páginas), Manual del sistema (44 páginas), Manual de equipamiento (28 páginas), Manual de equipamiento (26 páginas), Manual de equipamiento (28 páginas)

Service and maintenance

Cleaning the device

The operator panel front is designed for low-maintenance operation. Nevertheless, you must

regularly clean the display.

Note

Switch the device off for cleaning

Clean the device only when it is switched off. This ensures that you cannot unintentionally

trigger any functions when cleaning.

For cleaning, use a soft cloth moistened either with water or a mild cleaning agent. Only use

dish soap or foaming screen detergent as cleaning agents.

Procedure

Spray the cleaning agent on to a cleaning cloth. Never use caustic solvents or abrasive

cleaners.

Note

Avoid damage

Do not clean the device using compressed air or steam jets because they can damage it.

Checking the device

In order to prevent foreign bodies or liquids entering the device, regularly check the device for

the following:

• Ensure that all the housing screws are in place and tight

• For damage to the housing

• For damage to the cable cover or cable entry

Protect the device from environmental effects

Protect the device against the following environmental factors:

• Direct sunshine and heat sources

• Mechanical vibration and shock

• Dust

• Humidity

• Strong magnetic fields

Operator panel front: OP 010S

Equipment Manual, 12/2022, A5E50751046B AA