- ページ 31

産業機器 Siemens SINUMERIK 840D slのPDF 設備マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SINUMERIK 840D sl 48 ページ。 Operator panel front: op 010s
Siemens SINUMERIK 840D sl にも：アップグレード手順 (4 ページ), アップグレード手順 (5 ページ), 取扱説明書 (33 ページ), コミッショニング・マニュアル (36 ページ), アップグレード手順 (3 ページ), アップグレード手順 (3 ページ), システムマニュアル (44 ページ), 設備マニュアル (28 ページ), 設備マニュアル (26 ページ), 設備マニュアル (28 ページ)

Service and maintenance

Cleaning the device

The operator panel front is designed for low-maintenance operation. Nevertheless, you must

regularly clean the display.

Note

Switch the device off for cleaning

Clean the device only when it is switched off. This ensures that you cannot unintentionally

trigger any functions when cleaning.

For cleaning, use a soft cloth moistened either with water or a mild cleaning agent. Only use

dish soap or foaming screen detergent as cleaning agents.

Procedure

Spray the cleaning agent on to a cleaning cloth. Never use caustic solvents or abrasive

cleaners.

Note

Avoid damage

Do not clean the device using compressed air or steam jets because they can damage it.

Checking the device

In order to prevent foreign bodies or liquids entering the device, regularly check the device for

the following:

• Ensure that all the housing screws are in place and tight

• For damage to the housing

• For damage to the cable cover or cable entry

Protect the device from environmental effects

Protect the device against the following environmental factors:

• Direct sunshine and heat sources

• Mechanical vibration and shock

• Dust

• Humidity

• Strong magnetic fields

Operator panel front: OP 010S

Equipment Manual, 12/2022, A5E50751046B AA