Siemens SIPART PS2 Instrucciones de instalación - Página 4

Navegue en línea o descargue pdf Instrucciones de instalación para Equipamiento industrial Siemens SIPART PS2. Siemens SIPART PS2 11 páginas. Mounting bracket kit
También para Siemens SIPART PS2: Instrucciones de instalación (4 páginas), Manual de instrucciones (28 páginas), Instrucciones de instalación (4 páginas), Manual de instalación del hardware (30 páginas), Descripción técnica (26 páginas), Instrucciones de uso Compact (35 páginas), Instrucciones de instalación del kit (9 páginas)

15900-795

Assemble Retaining Clip to Feedback Lever

1. On the actuator nameplate, read the actuator model and valve travel for the actuator at hand. Find

that model and travel in Table 2 below. The retaining clip position is shown to the right of the valve

travel.

Actuator

Model

M-00

M-11

M-22

M-33

M-44-78

M-44-108

2. Orient the feedback lever (text side facing you) and retaining clip as shown in Figure 2. Align the

clip with the lever as shown in the selected row in Table 2. (Example: the clip location for a valve

travel of 3.07 is shown in Figures 2 and 3.)

3. Press the lever into the clip and lift the two hooked ends of the clip until they can be placed in two

notches in the lever and hook onto the lever. See Figure 3.

FIGURE 2 Pressing the Feedback Lever into the Retaining Clip

TABLE 2 Retaining Clip Location

Valve

Clip

Travel

Position

0.71"

1.10"

1.50"

2.28"

3.07"

4.25"

FIGURE 3 Placing the Retaining Clip on the Feedback Lever

Retaining Clip Location