Samsung 5 Series Manual del usuario - Página 9

Imprimir página

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

. Press the POWER button on the remote control.

The message Select 'Home Use' when installing this TV in your home. is

displayed.

The factory default setting for the picture will be Standard.

Standard mode is the recommended home viewing picture mode.

You can also use the POWERP button on the TV.

. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button.

We recommend setting the TV to Home Use mode for the best picture in your home

environment.

Store Demo mode is only intended for use in retail environments.

If the unit is accidentally set to Store Demo mode and you want to return to Home

Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU

button on the TV for 5 seconds.

. Press the ENTERE button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to

confirm your choice.

4. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select Start.

●

Digital & Analogue: Digital and Analogue channels.

●

Digital: Digital channels.

●

Analogue: Analogue channels.

The channel search will start and end automatically.

Press the ENTERE button at any time to interrupt the memorization process.

After all the available channels are stored, the message Set the Clock Mode. is displayed.

. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button.

If you select Manual, Set current date and time is displayed.

If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock.

. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. (Australia only)

7. The description for the connection method providing the best HD screen quality is displayed. Check the description and press

the ENTERE button.

8. Press the ENTERE button to confirm your setting. The message Enjoy your TV. is displayed. When you have finished,

press the ENTERE button.

Even if the ENTERE button is not pressed, the message will automatically disappear after several seconds.

If you want to return to this feature...

. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.

. Press the ENTERE button again to select Plug & Play.

. Enter your 4 digit PIN number. The default PIN number of a new TV set is '0-0-0-0'.

If you want to change PIN number, use the Change PIN function. (refer to page 19)

The Plug & Play feature is only available in the TV mode.

Any previous settings and adjustments will remain including the picture mode.

All Channel settings will be lost.

For home viewing, ensure the picture mode is set to Standard.

[550_Aus]BN68-01895D-02Eng.indb 7

English - 7

Plug & Play

Select 'Home Use' when installing this TV in your

home.

Store Demo

Home Use

L Move

E Enter

2009-09-16

11:12:42