Samsung 5 Series Manual del usuario - Página 22

Imprimir página

Advanced Features

Network Setup (PBC (WPS))

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the

remote, use the ▲or▼ button to select Setup, and then

press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup

menu, and then press the ENTERE button.

4. On the Network screen, select Network Type.

5. Set Network Type to Wireless.

6. Select Network Setup. The Network Setup screen

appears.

Network Setup

Select a network

Internet Protocol Setup

IP Address

Subnet Mask

Gateway

DNS

DNS Server

PBC(WPS) U Move E Enter R Return

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2

minutes. Your TV player automatically acquires all the

network setting values it needs and connects to your

network.

9. After the network connection is set up, press the

RETURN

button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system

that requires devices that access the network to transmit

an encrypted security code called an Access or Security

Key. The Security Key is based on a Pass Phrase, typically

a word or a series of letters and numbers of a specified

length you were asked to enter when you set up security for

your wireless network. If you use this method of setting up

the network connection, and have a Security Key for your

wireless network, you will have to enter the Pass Phrase

during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these

steps:

1. Follow Steps 1 through 6 in the "How to set up PBC

(WPS)" above.

2. Press the ▼ button to select Internet Protocol Setup,

and then press the ENTERE button. Press the ▲ or

▼ button to select Auto, and then press the ENTERE

button.

English

button on your

: Not Selected

►

: Auto

Auto

3. Press the ▲ button to go to Select a Network, and

then press the ENTERE button. The Network function

searches for available wireless networks. When done, it

displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select

a network, and then press the ENTERE button.

✎

If the AP is set to Hidden (Invisible), you have

to select Add Network and enter the correct

Network Na me (SSID) and Security Key to

establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the

Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select Security or PIN. For

most home networks, you would select Security (for

Security Key). The Security Screen appears.

Network Setup

Security Key

7. On the Security screen, enter your network's Pass

Phrase.

✎

You should be able to find the Pass Phrase on

one of the set up screens you used to set up your

router or modem.

8. To enter the Pass Phrase, follow these general

directions:

–

Press the number buttons on your remote to enter

numbers.

–

Use the direction buttons on your remote to move

from button to button on the Security Key screen.

–

Press the Red button to change case or display

symbols/characters.

–

To a enter letter or symbol, move to the letter or

symbol, and then press the ENTERE button.

–

To delete the last letter or number you entered,

press the Green button on your remote.

9. When done, press the Blue button on your remote. The

Network Connecting screen appears.

10. Wait until the connection confirmation message is

displayed, and then press the ENTERE button. The

Network Setup screen re-appears.

11. To test the connection, press the

select Network Test, and then press the ENTERE

button.

0 entered

Number

0~9

Lower case

Delete

Space

n Move E Enter R Return

RETURN

button to