Samsung 5 Series Manual del usuario - Página 2

Imprimir página

Sound Menu

Setup Menu

Sound Mode t

Language

■ Standard: Selects the normal sound mode.

Set the menu language.

■ Music: Emphasizes music over voices.

✎

Press ◄ or ► button to select menu language. (According to the different areas,

■ Movie: Provides the best sound for movies.

some countries have only one language.)

■ Clear Voice: Emphasizes voices over other sounds.

Time

Equalizer

✎

The current time will appear every time you press the

(standard sound mode only)

■ Clock Set: Set the Year, Month, Day, Hour, Minute.

■ Balance: Adjusts the balance between the right and left speaker.

■ On Timer/Off Timer

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):

✎

Current time should be set first by Clock Set.

Adjusts the level of specific bandwidth frequencies.

Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,

■ Reset: Resets the Equalizer to its default settings.

Mon~Sat, Sat~Sun, Sun.

DTS TruSurround t

Select Off to turn of Repeat.

Hour/Minute: Enter the hour and minute for the TV to turn on or off.

(standard sound mode only)

Contents: Select TV.

This function provides a virtual 5.1 channel surround sound experience

Channel: Select the channel to be played when the TV turns on

through a pair of speakers using HRTF (Head Related Transfer Function)

automatically.

technology.

Volume: Select the volume level when TV turns on automatically.

Auto Volume

■ Sleep Timer t

Automatically shuts off the TV after a preset period of time. (Off, 30

Because each broadcasting station has its own signal conditions, the

volume may fluctuate each time channel is changed. This feature lets you

min, 60 min, 90 min, 120 min, 150 min and 180 min)

automatically adjust the volume of the desired channel by lowering the

✎

To cancel Sleep Timer, select Off.

sound output when the modulation signal is high or by raising the sound

Melody

output when the modulation signal is low.

Speaker Select

Set so that a melody plays when the TV is turned Off, Low, Medium

and High.

A sound echo may occur due to a difference in decoding speed between

✎

The Melody does not play.

the main speaker and the audio receiver. In this case, set the TV to

External Speaker.

When no sound is output from the TV because the volume has been reduced to

minimum with the

VOL –

button.

✎

When you set Speaker Select to External Speaker, the TV's speakers are

When the TV is turned off by Sleep Timer function.

turned off. You will hear sound through the external speakers only. When you

set Speaker Select to TV Speaker, both the TV's speakers and the external

Self Diagnosis

speakers are on. You will hear sound through both.

✎

For India Only.

When Speaker Select is set to External Speaker, the volume and

MUTE

buttons will not operate and the sound settings will be limited.

■ Picture Test: Use to check for picture problems. If the problem

continues to occur, check the color pattern.

✎

If there is no video signal, both speakers will be mute.

■ Sound Test: Use the built-in melody sound to check for sound problems.

TV Installation Type

■ Reset: Reset all settings to the factory defaults.

This is the feature that set sound filter to fit into the installation condition

of TV. Adjust TV Sound to suit either stand or Wall Mount Installation.

Support Menu

✎

For India Only.

Sound Reset

❑ Using the Media Play

Enjoy photos, music and/or movie files saved on a USB

■ Reset All: Reset all sound settings to the factory defaults.

Mass Storage Class (MSC) device.

Selecting the Sound Mode t

Connecting a USB Device

When you set to Dual I-Dual II, the current sound mode is displayed on

the screen.

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie files to

Audio Type

Dual I-II

Default

the USB jack on the side of the TV.

Mono

Automatic

3. When USB is connected to the TV, you can select Media Play.

Stereo ↔ Mono

change

A2 Stereo

Stereo

✎

Dual

Dual I ↔ Dual II

Dual I

The maximum displayed number of partition is 4.

Mono

Automatic

Using the Media Play Menu

change

NICAM

Stereo

Mono ↔ Stereo

Stereo

Mono ↔ Dual I

1. Press the

button. Press the ▲ or ▼ button to select Support,

Dual I

Dual

then press the ENTERE button.

 Dual II 

2. Press the ▲ or ▼ button to select Media Play (USB), then press the

✎

ENTERE button.

If the stereo signal is weak and an automatic switching, occurs, then switch to

the mono.

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos),

✎

then press the ENTERE button.

Only activated in stereo sound signal.

✎

It might not work properly with unlicenced multimedia files.

This function is available for all input sources.

✎

If you want to view detailed information of the file being played, press

button in the file list, and then select Information.

✎

Need-to-Know List before using Media Play (USB)

•

Supported file systems are FAT and NTFS.

Certain types of USB Digital camera and audio devices may not

•

be compatible with this TV.

- 9 -

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit "www.samsung.com," then click

on Support, or contact the call centre listed on the back-cover of this manual.

Problem

Possible Solution

Picture Quality

The TV image does not look as good as it

y If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD

did in the store.

(high definition) picture quality.

y Antenna connection: Try HD stations after performing Auto tuning.

✎

Many HD channels are up scaled from SD(Standard Definition) contents.

y Adjust the Cable/Set top box video output resolution to 1080i or 720p.

y Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.

The picture is distorted: macroblock error,

y Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action

small block, dots, pixelization

movies.

y Low signal level or bad quality can cause picture distortion. This is not a TV issue.

y Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

Colour is wrong or missing.

y If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause colour problems or a blank screen.

There is poor colour or brightness.

y Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)

y Try resetting the picture to view the default picture settings. (go to

- Picture - Picture Reset)

There is a dotted line on the edge of the

y If the picture size is set to Screen Fit, change it to 16:9.

screen.

y Change cable/satellite box resolution.

The picture is black and white.

y If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.

When changing channels, the picture

y If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box

freezes or is distorted or delayed.

reboots. It may take up to 20 minutes.

y Set the output resolution of the cable box to 1080i or 720p.

Sound Quality

There is no sound or the sound is too low at

y Please check the volume of external device connected to your TV.

maximum volume.

The picture is good but there is no sound.

y Set the Speaker Select option to TV Speaker in the sound menu.

y If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.

y If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's

audio option to HDMI when you have a HDMI connected to your TV).

y If you are using a HDMI cable, a separate audio cable is required.

y If your TV has a headphone jack, make sure there is nothing plugged into it.

The speakers are making an inappropriate

y Check the cable connections. Make sure a video cable is not connected to an audio input.

noise.

y For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.

No Picture, No Video

The TV will not turn on.

y Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

y Make sure the wall outlet is working.

y Try pressing the

POWER

button on the TV to make sure the problem is not the remote. If the TV turns on, refer to "The

remote control does not work" below.

The TV turns off automatically.

y Ensure the Sleep Timer is set to Off in the Time menu.

y If your PC is connected to the TV, check your PC power settings.

y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

y When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.

There is no picture/video.

y Check cable connections (remove and reconnect all cables connected to the TV and external devices).

y Set your external devices' (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.

For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.

y Make sure your connected devices are powered on.

y Be sure to select the TV's correct source by pressing the

SOURCE

button on the TV remote.

- 13 -

[UH4000-SEA]BN68-05733E-16ENG.indb 2

Media Play only supports USB Mass Storage Class (MSC) devices.

Internal

•

MSC is a Mass Storage Class Bulk-Only Transport device. Examples

of MSC are Thumb drives and Flash Card Readers. Devices should

be connected directly to the TV's USB port. (LED 4000, 4003, 5000,

SubStation Alpha

5003 series : USB HDD is not supported.) Does not support smart

Advanced SubStation Alpha

devices connected in MTP or PTP protocol.

SubRip

•

Before connecting your device to the TV, please back up your files

MPEG-4 Timed text

to prevent them from damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

y Supported Video Formats

•

A USB device that requires high power may not be supported. (LED

File

4000, 4003, 5000, 5003 series : 0.5A)

Container

Extension

INFO

button.

(LED 4100, 5100 series and above: 1A)

•

Do not disconnect the USB device while it is loading.

*.mp4

MP4

•

The higher the resolution of the image, the longer it takes to display

on the screen.

The maximum supported JPEG resolution is 15360 x 8640 pixels.

•

*.avi

AVI

•

If a file is corrupted or the TV does not support the file type, the "Not

*.mkv

MKV

Supported File Format" message appears.

•

If a USB extension cable is used, the USB device may not be

*.asf

ASF

recognized or the files on the device may not be read.

*.wmv

•

The TV cannot play MP3 files with DRM that have been downloaded

*.ts

from a for-pay site. Digital Rights Management (DRM) is a technology

*.trp

that supports the creation, distribution, and management of

*.tp

digital content in an integrated and comprehensive way, including

*.dat

protecting the rights and interests of content providers, preventing

*.mpg

*.mpeg

illegal copying of contents, and managing billings and settlements.

*.vob

PTP device is not supported.

•

*.3gp

3GPP

•

If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be recognized

*.flv

flash formats

or may malfunction.

•

The power-saving mode of some external hard disk drives may be

Other Restrictions

released automatically when your connect them to the TV.

•

If a USB device connected to the TV is not recognized, the list of

y Video content will not play, or not play correctly, if there is an error in the

files on the device is corrupted, or a file in the list is not played,

content or the container.

connect the USB device to a PC, format the device, and check the

connection.

y Sound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the table above.

•

If a file you deleted from the PC is still found when you run Media

y If the Index Table is in error, the Seek (Jump) function is not supported.

Play, use the "Empty the Recycle Bin" function on the PC to

permanently delete the file.

y The menu may take longer to appear if the video's bit rate exceeds

10Mbps.

•

Photos only supports sequential jpeg format.

y Video content can not be played, if there are many contents in one file.

•

The scene search and thumbnail functions are not supported in the

Videos.

Video Decoder

POWER

•

If the number of files and folders saved on a USB storage device is

approximately over 4000, the files and folders may not appear and

Supports up to H.264, Level 4.1

some folders may not be opened.

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

•

The maximum displayed number of files, including sub folders, in

MPEG4 SP, ASP :

one folder of USB storage device is 2000.

– Below 1280 x 720: 60 frame max

The media may not be playing smoothly when using the device

•

– Above 1280 x 720: 30 frame max

higher than USB 2.0.

H.263 is not supported.

✎

GMC is not support.

The maximum displayed number of partition is 4.

MEDIA.P

•

The file name only works in supported menu language. The other

Audio Decoder

language is not displayed properly.

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

■ Videos

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not

1. Press the ◄ or ► button to select Videos, then press the ENTERE

supported)

button in the Media Play menu.

WMA Lossless is not supported.

2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list.

Music

3. Press the ENTERE button or

(Play) button.

1. Press the ◄ or ► button to select Music, then press the ENTERE

The selected file is displayed on the top with its playing time.

button in the Media Play menu.

If video time information is unknown, playing time and the progress bar are not

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.

displayed.

3. Press the ENTERE button or

During video playback, you can search using the ◄ and ► button.

✎

During music playback, you can search using the ◄ and ► button.

You can use (

) (REW) and (

) (FF) buttons during playback.

✎

(REW) and

✎

In this mode, you can play movie clips contained in a game, but you cannot play

✎

Only displays the files with MP3 file extension. Other file extensions are not

the game itself.

displayed, even if they are saved on the same USB device.

y Supported Subtitle Formats

✎

If the need to change Equalizer - when playing MP3, then exit Media Play, adjust

External

the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound

Name

File extension

problem.)

MPEG-4 timed text

.ttxt

SAMI

.smi

TOOLS

SubRip

.srt

SubViewer

.sub

Micro DVD

.sub or .txt

SubStation Alpha

.ssa

Advanced SubStation Alpha

.ass

- 10 -

Problem

Possible Solution

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

y Make sure the Antenna cable is connected securely.

y Please try Setup (Plug & Play) to add available channels to the channel list. Go to

wait for all available channels to be stored.

y Verify the Antenna is positioned correctly.

The picture is distorted: macroblock error,

y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

small block, dots, pixelization

movies.

y A low signal can cause picture distortion. This is not a TV issue.

PC Connection

A "Mode Not Supported" message

y Set your PC's output resolution so it matches the resolutions supported by the TV.

appears.

The video is OK but there is no audio.

y If you are using a HDMI connection, check the audio output setting on your PC.

Others

The picture will not display in full screen.

y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

y Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

y Adjust the picture size options on your external device or TV to full screen.

The remote control does not work.

y Replace the remote control batteries with the poles (+/–) in the right direction.

y Clean the transmission window located on the top of the remote control.

y Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control does

y Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

not turn the TV on or off, or adjust the

SAMSUNG TV code.

volume.

A "Mode Not Supported" message

y Check the supported resolution of the TV, and adjust the external device's output resolution accordingly. Refer to resolution

appears.

settings in this manual.

There is a plastic smell from the TV.

y This smell is normal and will dissipate over time.

TV is tilted to the right or left side.

y Remove the stand base from the TV and reassemble it.

There are difficulties assembling the stand

y Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws

base.

from the TV.

The Broadcasting menu is grey out

y The Broadcasting menu is only available when the TV source is selected.

(unavailable).

Your settings are lost after 5 minutes or

y If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings

every time the TV is turned off.

from Store Demo mode to Home Use.

You have intermittent loss of audio or video.

y Check the cable connections and reconnect them.

y Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long

term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

y This is part of the product's design and is not a defect.

closely at the edge of the frame of the TV.

There are recurrent picture/sound issues.

y Check and change the signal/source.

A reaction may occur between the rubber

y To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

cushion pads on the base stand and the

top finish of some furniture.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

✎

You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.

- 14-

■ Photos

Name

Container

Format

1. Press the ◄ or ► button to select Photos, then press the ENTERE

Xsub

AVI

Picture Format

button in the Media Play menu.

MKV

Text Format

2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.

MKV

Text Format

3. Press the ENTERE button or

(Play) button.

MKV

Text Format

✎

NOTE

MP4

Text Format

While a photo list is displayed, press the

(Play) / ENTERE button on the remote

control to start the slide show.

All files in the file list section will be displayed in the slide show.

Frame

Video Codec

Resolution

Bit rate(Mbps)

Audio Codec

rate(fps)

During the slide show, files are displayed in order.

DivX 3.11/4.12/5.x/6.0

1920x1080

6~30

20Mbps

H.264

1920x1080

6~30

20Mbps

MP3 / ADPCM /

During the slide show, you can adjust the slide show speed using (

VC-1

1920x1080

6~30

20Mbps

AAC

) (FF) button.

MJPEG

640x480

6~30

10Mbps

You can move to other file using ◄ or ► button.

DivX 3.11/4.12/5.x/6.0

1920x1080

6~30

20Mbps

MP3 / AC3 /

✎

MPEG 1/2/4

1920x1080

6~30

20Mbps

Press

TOOLS

button and select Background Music. Music files can be

LPCM / ADPCM

H.264

1920x1080

6~30

20Mbps

/ DTS

automatically played during the Slide Show if the Background Music is set to On.

MJPEG

640x480

6~30

10Mbps

✎

The Mode in Background Music cannot be changed until the BGM has finished

DivX 3.11/4.12/5.x/6.0

1920x1080

6~30

20Mbps

MP3 / AC3 /

MPEG 1/2/4

1920x1080

6~30

20Mbps

LPCM /ADPCM /

WMA / WMA Pro

H.264

1920x1080

6~30

20Mbps

y Supported Photo Formats

MPEG2-TS

1920x1080

6~30

20Mbps

AC3 / AAC /

Image

Photo

Resolution

MP3 / DD+

H. 264

1920x1080

6~30

20Mbps

Base-line

15360 x 8704

JPEG

MPEG1

1920x1080

6~30

20Mbps

Progressive

1024 x 768

AC3 / MPEG /

MPEG2

1920x1080

6~30

20Mbps

LPCM / AAC

Other Restrictions

H. 264

1920x1080

6~30

20Mbps

MPEG 1/2/4

1920x1080

6~30

20Mbps

MP3

CMYK, YCCK Colour space JPEG are not supported.

H.264

1920x1080

6~30

20Mbps

H.264

1920x1080

6~30

20Mbps

■ Playing Multiple Files

MP3

Sorenson H.263

1920x1080

6~30

20Mbps

Playing selected video/music/photo files

1. Press the Yellow button in the file list to select the desired file.

2. Repeat the above operation to select multiple files.

✎

NOTE

The c mark appears to the left of the selected files.

To cancel a selection, press the Yellow button again.

To deselect all selected files, press the

TOOLS

button and select Deselect All.

■ Playing the video/music/photo file group

While a file list is displayed, move to any file in desired group.

■ Copying the files to the other USB device

For 4100 / 5100 models

1. Press the

button in the file list to select the desired file.

2. When you press the

button, the selected files copy to the other

USB device.

✎

Available only when both USB devices are connected to the TV.

✎

The FAT32 file system cannot copy the file which size is more than 4GB.

✎

Copy&Capture is only available for 4100/5100 models.

✎

The maximum number of marked files for one folder is 999, if to be continued, 1

more files can be marked in another folder.

USB

Support File System

Play (Read)

NTFS, FAT, FAT32

Copy & Capture

FAT, FAT32

Delete

NTFS,FAT,FAT32

Format

NTFS,FAT,FAT32

✎

All file system format will be transformed to FAT32 system after formating.

■ Media Play - Additional Functions

Videos/Music/Photos Play Option menus

When playing a file, press the

TOOLS

button.

(Play) button.