Samsung 5 Series Manual del usuario - Página 10

Imprimir página

Wall Mount Kit Speciﬁcations (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. If you

are attaching the wall mount to a wall made of building materials other

than drywall, please contact your nearest dealer for information about

the appropriate mounting hardware. If you install the TV on a ceiling or

slanted wall, it may fall and result in severe personal injury.

✎

NOTE

Standard dimensions for wall mount kits are shown in the table

below.

When purchasing our wall mount kit, a detailed installation manual

and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard

screw specifications.

Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

For wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on

the wall mount specifications.

Do not fasten the screws too firmly. This may damage the product

or cause the product to fall, leading to personal injury. Samsung is

not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when

a non-VESA or non-specified wall mount is used or the consumer

fails to follow the product installation instructions.

Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV on a wall.

Product

TV size in

VESA screw hole specs

Family

inches

(A * B) in millimeters

19~22

26-29

LED-TV

32-42

46~60

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may

cause the TV to fall. In particular, ensure that your children

do not hang over or destabilize the TV. Doing so may cause

the TV to tip over, resulting in serious injuries or death.

Follow all safety precautions provided on the included

Safety Flyer. For added stability, install the anti-fall device for

safety purposes, as described below.

To prevent the TV from falling

✎

TV Holder kits are sold separately. To purchase a TV Holder kit,

contact Samsung Customer Care.

1. Insert the screws into the wall brackets and ﬁrmly fasten them to the

wall. Make sure the screws are ﬁrmly ﬁxed to the wall.

✎

We strongly recommend you drive the screws into a stud.

2. Insert the screws through the TV brackets, and then fasten the

screws to the top VESA screw holes on the back of the TV.

3. Connect the brackets on the TV and the brackets on the wall with a

strong string or cable, and then tie the string or cable tightly to the

brackets.

✎

Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

✎

Install the TV close to the wall so that it does not fall.

✎

Connect the string or cable so that the brackets on the wall are at

the same height or lower than the brackets on the TV. Untie the

string or cable before moving the TV.

Standard

Screw

75 X 75

100 X 100

200 X 200

400 X 400

Do not install your Wall Mount Kit while your

TV is turned on. It may result in personal

injury due to electric shock.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically ﬁx the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

✎

Please find a "K" icon on the rear of the TV. The Kensington slot is

beside the "K" icon.

✎

The position and color may differ depending on the model.

Display Modes (HDMI/DVI Input)

Optimal resolution

4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz

Mode

Resolution

IBM

720 x 400

640 x 480

MAC

832 x 624

1152 x 870

640 x 480

800 x 600

1024 x 768

VESA DMT

1152 x 864

1280 x 720

1280 x 800

1280 x 1024

Quantity

1366 x 768

1440 x 900

1600 x 900RB

1680 x 1050

1920 x 1080

Assembling the Cable manager

Caution of the cover-jack

for 4 series, 5 series 32" and above

CAUTION: The cover-jack is for use by qualiﬁed service

personnel only. To reduce the risk of electric shock or ﬁre

hazard, do not use the cover jack, unless you are qualiﬁed

to do so.

✎

The product shape may differ depending on the model.

- 11 -

Horizontal

Vertical

Pixel Clock

Frequency

(KHz)

(Hz)

(MHz)

31.469

70.087

28.322

35.000

66.667

30.240

49.726

74.551

57.284

68.681

75.062

100.000

31.469

59.940

25.175

37.861

72.809

31.500

37.500

75.000

31.500

37.879

60.317

40.000

48.077

72.188

50.000

46.875

75.000

49.500

48.363

60.004

65.000

56.476

70.069

75.000

60.023

75.029

78.750

67.500

75.000

108.000

45.000

60.000

74.250

49.702

59.810

83.500

63.981

60.020

108.000

79.976

75.025

135.000

47.712

59.790

85.500

55.935

59.887

106.500

60.000

108.000

65.290

59.954

146.250

67.500

60.000

148.500

TV Rear Panel

Cover-jack

Sync

1366 x

1920 x

Polarity

768

1080

(H / V)

-/+

-/-

+/+

-/-

+/+

-/+

+/+

-/+

+/+

-/+

+/+