Samsung 5 Series Manual del usuario - Página 45

Imprimir página

Issues

No Picture, No Video

The TV will not turn on.

The TV turns off automatically.

There is no picture/video

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

No Caption on digital channels.

The picture is distorted: macroblock,

error, small block, dots, pixelization.

PC Connection

A "Mode not supported" message

appears.

"PC" is always shown on the source list,

even if a PC is not connected.

The video is OK but there is no audio.

Network Connection

The wireless network connection failed.

Software Upgrade over the network

fails.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers

with Component cable connection.

The picture will not display in full screen.

solutions and Explanations

•

Make sure the AC power cord is securely plugged into the wall outlet and the TV.

•

Make sure the wall outlet is working.

•

Try pressing the

POWER

button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to 'Remote control does not work' below.

•

Ensure the

sleep Timer is set to Off in the setup menu. (P. 18)

•

If your PC is connected to the TV, check your PC power settings.

•

Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

•

When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15

minutes if there is no signal.

•

Check cable connections. (remove and reconnect all cables connected to the TV and external

devices).

•

Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the

connections to the TV input. For example, if an external device's output is HDMI, it should be

connected to an HDMI input on the TV.

•

Make sure your connected devices are powered on.

•

Be sure to select the TV's correct source by pressing the

control.

•

Reboot the connected device by reconnecting the device's power cable.

•

Make sure the coaxial cable is connected securely.

•

Please try

Auto Program to add available channels to the channel list.

go to

- Channel - Auto Program then select Auto and make sure the correct Cable TV

signal type is set in the menu. There are 3 options. (sTD, hRC and IRC) (P. 12)

•

Verify the Antenna is positioned correctly.

•

Check Caption Setup menu. Try changing

•

Some channels may not have caption data.

•

Compression of video contents may cause picture distortion. especially on fast moving pictures

such as sports and action movies.

•

A low signal can cause picture distortion. This is not a TV problem.

•

Set your PC's output resolution so it matches the resolutions supported by the TV.

•

This is normal; "PC" is always shown on the source list, regardless of whether a PC is

connected.

•

If you are using a HDMI connection, check the audio output setting on your PC.

•

Samsung Wireless USB dongle is required to use a wireless network.

•

Make sure the Network Connection is set to

•

Make sure the TV is connected to a wireless IP sharer (Router).

•

Try network test in

setup menu. (P. 26)

•

If you have latest SW version, SW upgrade will not proceed.

•

Remove the left and right audio connections from the set-top-box. If the buzzing stops, this

indicates that the set-top-box has a grounding issue. Replace the Component video cables

with an HDMI connection.

•

HD channels will have black bars on either side of the screen when displaying upscaled SD

(4:3) contents.

•

Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your

TV.

•

Adjust picture size option on your external device or TV to full screen.

sOURCE

button on the remote

Caption Mode service 1 to CC1. (P. 20)

Wireless. (P. 25)

English