Cisco 6941 - Unified IP Phone Slimline VoIP Manual de instalación - Página 14

Navegue en línea o descargue pdf Manual de instalación para Teléfono IP Cisco 6941 - Unified IP Phone Slimline VoIP. Cisco 6941 - Unified IP Phone Slimline VoIP 16 páginas. Two-line ip endpoint supporting both video and light-to-moderate voice communications
También para Cisco 6941 - Unified IP Phone Slimline VoIP: Ficha de datos (5 páginas), Notas de publicación (18 páginas), Ficha de datos (5 páginas), Manual del usuario (38 páginas), Manual de administración (14 páginas), Características (29 páginas), Manual del usuario (24 páginas), Manual de consulta rápida (2 páginas), Manual de inicio rápido (2 páginas), Manual de referencia (4 páginas), Tarjeta de referencia rápida (2 páginas), Manual de administración (19 páginas), Manual de uso (7 páginas), Manual de consulta rápida (2 páginas), Manual de inicio rápido (4 páginas)

Cisco 6941 - Unified IP Phone Slimline VoIP Manual de instalación

Mounting the Phone to the Wall

Lower Viewing Angle

Mounting the Phone to the Wall
You can mount the Cisco Unified IP Phone on the wall by using special brackets available in a
Cisco Unified IP Phone wall mount kit. For information on installing the wall mount kit, see
Appendix E, "Installing the Wall Mount Kit for the Cisco Unified IP Phone 6921, 6941, 6945, and 6961"
or
Appendix F, "Cisco Unified IP Phone Non-Lockable Wall Mount."
Wall mount kits are ordered separately from the phone.
Note

Verifying the Phone Startup Process

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic
process by cycling through the following steps.
1.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
3-14
The following LED buttons flash on and off during the various stages of boot up as the phone checks
its hardware. See
Table 3-2
for a list of the hardware test and the LED diagnostic status.
Chapter
OL-24567-01