Cisco 7832 Manual - Página 6

Navegue en línea o descargue pdf Manual para Teléfono IP Cisco 7832. Cisco 7832 22 páginas. Ip conference phone
También para Cisco 7832: Manual maestro de migración de firmware (31 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (21 páginas), Manual de solución de problemas (10 páginas), Comenzar (6 páginas), Manual de instalación (39 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Inicio rápido (2 páginas), Inicio rápido (2 páginas), Manual (30 páginas), Manual de instrucciones (9 páginas), Referencia rápida (2 páginas)

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding

to connect to your company's phone network.

Enter an Activation Code

Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.

Contact your administrator if you don't know your code or if you need a new one.

Procedure

Step 1

Enter your activation code on the activation screen.

Step 2

Press Submit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect to your corporate network when

you are working away from your office.

Procedure

Step 1

Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.

Step 2

Press Select when prompted to change the service mode.

Step 3

Enter your activation code or service domain on the Welcome screen and press Continue.

Step 4

Enter your username and password.

Step 5

Select Sign in.

Replace Your Existing Phone with a New Phone

You can change your phone model. The change can be required for a number of reasons, for example:

• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version

• You wants a different phone model from their current model.

• Your phone requires repair or replacement.

Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have

the extra lines or line buttons configured.

The phone reboots when the configuration is complete.

Before you begin

Your administrator needs to set up Cisco Unified Communications Manager to enable the phone migration.

Your Phone

that doesn't support the phone model.

Your Phone