Cisco 7832 Manuel - Sayfa 6

IP Telefon Cisco 7832 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 7832 22 sayfaları. Ip conference phone
Ayrıca Cisco 7832 için: Ürün Yazılımı Geçişi Ana Kılavuzu (31 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Sorun Giderme Kılavuzu (10 sayfalar), Başlayın (6 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Yeniden Yapılandırma Kılavuzu (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Manuel (30 sayfalar), Talimatlar Kılavuzu (9 sayfalar), Hızlı Referans (2 sayfalar)

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding

to connect to your company's phone network.

Enter an Activation Code

Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.

Contact your administrator if you don't know your code or if you need a new one.

Procedure

Step 1

Enter your activation code on the activation screen.

Step 2

Press Submit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect to your corporate network when

you are working away from your office.

Procedure

Step 1

Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.

Step 2

Press Select when prompted to change the service mode.

Step 3

Enter your activation code or service domain on the Welcome screen and press Continue.

Step 4

Enter your username and password.

Step 5

Select Sign in.

Replace Your Existing Phone with a New Phone

You can change your phone model. The change can be required for a number of reasons, for example:

• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version

• You wants a different phone model from their current model.

• Your phone requires repair or replacement.

Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have

the extra lines or line buttons configured.

The phone reboots when the configuration is complete.

Before you begin

Your administrator needs to set up Cisco Unified Communications Manager to enable the phone migration.

Your Phone

that doesn't support the phone model.

Your Phone