Cisco 7912 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 7912. Cisco 7912 10 páginas. Ip talk series
También para Cisco 7912: Manual del usuario (19 páginas), Documentación del usuario (5 páginas), Manual del teléfono (46 páginas), Manual del usuario (20 páginas), Manual del usuario (10 páginas), Manual de consulta rápida (7 páginas), Manual de inicio rápido (12 páginas), Manual de inicio rápido (6 páginas), Manual de referencia (20 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (5 páginas), Manual de consulta rápida (7 páginas)

Distinctive Ring Per Line appearance:

To Setup:

Allows you to answer calls to other phones within a designated call

pickup group.

To Activate: 1. As the phone rings at the extension within your

call pick-up group, pick up your handset to get

dial tone on your line.

2. Press the More Softkey to view the PickUp

Softkey.

3. Press the PickUp Softkey to transfer the call to

your extension.

4. Answer the incoming call that is redirected to

your phone by pressing the Answer Softkey.

Allows you to pre-program up to 99 frequently dialed #'s from

your phone.

To set up:

Go to the services screen on your phone, and select

My Fast Dials. Select the Assign softkey, then

toggle to the key you want to assign and press the

Select softkey. Now enter in the number you want

to program. Remember to put 9 or 91 in front of the

number if you are calling off campus. Once you

have entered the number press the Submit softkey,

you should get a message that tells you your fast

dial has been successfully assigned, select the Ok

softkey, and you are done.

To Use:

Go to the services screen on your phone, and select

My Fast Dials. Toggle to the Fast Dial you want to

dial, the press the Dial softkey.

Allows you to set distinctive rings on each

line appearance that you have on your phone

(7960 sets only).

1. Press the Settings button on your phone.

2. Select #2 Ring Type.

3. Scroll down to the line appearance you

want to change and hit the Select

Softkey.

4. Select one of seven different ring

settings by highlighting the ring type you

want, then hit the Select Softkey, and

then the Ok Softkey.