Cisco 7912 사용자 설명서 - 페이지 9

{카테고리_이름} Cisco 7912에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7912 10 페이지. Ip talk series
Cisco 7912에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 문서 (5 페이지), 전화 매뉴얼 (46 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (10 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (6 페이지), 참조 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 참조 매뉴얼 (7 페이지)

Distinctive Ring Per Line appearance:

To Setup:

Allows you to answer calls to other phones within a designated call

pickup group.

To Activate: 1. As the phone rings at the extension within your

call pick-up group, pick up your handset to get

dial tone on your line.

2. Press the More Softkey to view the PickUp

Softkey.

3. Press the PickUp Softkey to transfer the call to

your extension.

4. Answer the incoming call that is redirected to

your phone by pressing the Answer Softkey.

Allows you to pre-program up to 99 frequently dialed #'s from

your phone.

To set up:

Go to the services screen on your phone, and select

My Fast Dials. Select the Assign softkey, then

toggle to the key you want to assign and press the

Select softkey. Now enter in the number you want

to program. Remember to put 9 or 91 in front of the

number if you are calling off campus. Once you

have entered the number press the Submit softkey,

you should get a message that tells you your fast

dial has been successfully assigned, select the Ok

softkey, and you are done.

To Use:

Go to the services screen on your phone, and select

My Fast Dials. Toggle to the Fast Dial you want to

dial, the press the Dial softkey.

Allows you to set distinctive rings on each

line appearance that you have on your phone

(7960 sets only).

1. Press the Settings button on your phone.

2. Select #2 Ring Type.

3. Scroll down to the line appearance you

want to change and hit the Select

Softkey.

4. Select one of seven different ring

settings by highlighting the ring type you

want, then hit the Select Softkey, and

then the Ok Softkey.