Cisco 7925G - Unified Wireless IP Phone VoIP Manual de accesorios - Página 9

Navegue en línea o descargue pdf Manual de accesorios para Teléfono IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 20 páginas. Wavelink avalanche management console
También para Cisco 7925G - Unified Wireless IP Phone VoIP: Ficha de datos (8 páginas), Notas de publicación (16 páginas), Manual del usuario (28 páginas), Manual de accesorios (13 páginas), Manual de administración (19 páginas), Manual del usuario (10 páginas), Manual del usuario (16 páginas), Manual rápido (14 páginas), Manual de administración (23 páginas), Manual de instalación (21 páginas), Manual de administración (14 páginas)

Cisco Accessories

Charge Phone Using AC Power Supply

The following figure describes how you set up the phone to charge with the AC power supply. The numbers

refer to the procedure steps.

Figure 1: AC Power Supply

Procedure

Step 1

Lift the mini-USB port cover at bottom of phone.

Step 2

Swing the port cover to one side.

Step 3

Insert the AC power supply mini-USB connector in the port.

Step 4

Insert the AC plug adapter in the slot on the power supply.

Step 5

Insert the AC power supply in a wall outlet.

Step 6

Verify that the Indicator LED is red. Red indicates that the battery is charging. The LED turns green when

battery is charged.

The Cisco Unified Wireless IP Phone 7925G Multicharger can charge up to six phones and six batteries at

the same time, as shown in the following figure.

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide

Charge Phone Using AC Power Supply