Cisco 7925G - Unified Wireless IP Phone VoIP Aksesuar Kılavuzu - Sayfa 9

IP Telefon Cisco 7925G - Unified Wireless IP Phone VoIP için çevrimiçi göz atın veya pdf Aksesuar Kılavuzu indirin. Cisco 7925G - Unified Wireless IP Phone VoIP 20 sayfaları. Wavelink avalanche management console
Ayrıca Cisco 7925G - Unified Wireless IP Phone VoIP için: Veri Sayfası (8 sayfalar), Sürüm Notları (16 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Aksesuar Kılavuzu (13 sayfalar), Yönetim Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Hızlı Kılavuz (14 sayfalar), Yönetim Kılavuzu (23 sayfalar), Kurulum Kılavuzu (21 sayfalar), Yönetim Kılavuzu (14 sayfalar)

Cisco Accessories

Charge Phone Using AC Power Supply

The following figure describes how you set up the phone to charge with the AC power supply. The numbers

refer to the procedure steps.

Figure 1: AC Power Supply

Procedure

Step 1

Lift the mini-USB port cover at bottom of phone.

Step 2

Swing the port cover to one side.

Step 3

Insert the AC power supply mini-USB connector in the port.

Step 4

Insert the AC plug adapter in the slot on the power supply.

Step 5

Insert the AC power supply in a wall outlet.

Step 6

Verify that the Indicator LED is red. Red indicates that the battery is charging. The LED turns green when

battery is charged.

The Cisco Unified Wireless IP Phone 7925G Multicharger can charge up to six phones and six batteries at

the same time, as shown in the following figure.

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide

Charge Phone Using AC Power Supply