Cisco 7940G Manual de administración - Página 26

Navegue en línea o descargue pdf Manual de administración para Teléfono IP Cisco 7940G. Cisco 7940G 29 páginas. Ios telephony services ip phone
También para Cisco 7940G: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Manual (35 páginas), Referencia rápida (2 páginas), Manual del usuario (15 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual del teléfono (17 páginas), Manual del administrador (15 páginas), Manual del usuario (16 páginas), Manual de referencia (24 páginas), Manual (21 páginas), Manual de instalación (12 páginas), Manual del usuario (10 páginas)

Imprimir página

How to Create Dial Plans

Argument

Route="route"

Tone="tone"

Step 4

If desired, specify a comment at the end of each string to denote the type of plan.

For example:

or

Type the following to indicate the end of the dial-plan template:

Step 5

</DIALTEMPLATE>

Give the file a unique name specific to the dial plan that it defines and save it with a .xml extension to

Step 6

your TFTP server.

If the dial plan applies to a specific phone, add the path to the dial plan (without specifying the file type

Step 7

of .xml) via the dial_template parameter in the phone-specific configuration file. If the dial plan applies

to a system of phones, add the path to the dial plan via the dial_template parameter in the default

configuration file.

Dial-Plan Configuration Examples

Using the Pound-Sign (#) Character

The following example uses the pound sign (#) as a dialed digit:

</DIALTEMPLATE>

In the example above, the 123#45#6 string is matched if the user dials 123#45#6. Pressing the pound

sign (#) does not cause the phone to dial immediately because # is explicitly specified. However, dialing

1# or 123#4# causes the phone to dial immediately.

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-26

<TEMPLATE MATCH="34#..."

<TEMPLATE MATCH="*"

Description

Proxy to which to route the call. Valid values are default,

emergency, and FQDN. FQDN is treated the same as default proxy.

This entry is not case sensitive.

User-specific dial tone. If no tone is specified, the default secondary

dial tone plays. If a comma (,) is specified followed by a tone, the

phone plays the indicated tone instead of the secondary dial tone. If

a tone is specified but there is no comma, the tone is ignored.

You can specify up to three different secondary dial tones in a single

dial-plan template. The tones play in the order in which they appear

in the template. Multiple tone entries are condensed into a single

comma. For example, the phone interprets the match string

and treats the three commas as a single comma.

9,234

TIMEOUT="0" User="Phone"/>

TIMEOUT="15" User="Phone"/>

Chapter 3

Initializing Cisco Unified IP Phones

9,,,234

OL-7890-01