- ページ 26

IP電話 Cisco 7940GのPDF 管理マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7940G 29 ページ。 Ios telephony services ip phone
Cisco 7940G にも： ユーザーマニュアル (21 ページ), ユーザーマニュアル (25 ページ), データシート (7 ページ), マニュアル (35 ページ), クイック・リファレンス (2 ページ), ユーザーマニュアル (15 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (20 ページ), 電話マニュアル (17 ページ), 管理者マニュアル (15 ページ), ユーザーマニュアル (16 ページ), リファレンス・マニュアル (24 ページ), マニュアル (21 ページ), インストレーション・マニュアル (12 ページ), ユーザーマニュアル (10 ページ)

ページを印刷する
Cisco 7940G 管理マニュアル
How to Create Dial Plans
Argument
Route="route"
Tone="tone"
Step 4
If desired, specify a comment at the end of each string to denote the type of plan.
For example:
<!-- Long Distance --> or <!-- Corporate Dial Plan -->
Type the following to indicate the end of the dial-plan template:
Step 5
</DIALTEMPLATE>
Give the file a unique name specific to the dial plan that it defines and save it with a .xml extension to
Step 6
your TFTP server.
If the dial plan applies to a specific phone, add the path to the dial plan (without specifying the file type
Step 7
of .xml) via the dial_template parameter in the phone-specific configuration file. If the dial plan applies
to a system of phones, add the path to the dial plan via the dial_template parameter in the default
configuration file.

Dial-Plan Configuration Examples

Using the Pound-Sign (#) Character
The following example uses the pound sign (#) as a dialed digit:
<DIALTEMPLATE>
</DIALTEMPLATE>
In the example above, the 123#45#6 string is matched if the user dials 123#45#6. Pressing the pound
sign (#) does not cause the phone to dial immediately because # is explicitly specified. However, dialing
1# or 123#4# causes the phone to dial immediately.
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
3-26
<TEMPLATE MATCH="123#45#6" TIMEOUT="0" User="Phone"/> <!-- Match '#' -->
<TEMPLATE MATCH="34#..."
<TEMPLATE MATCH="*"
Description
Proxy to which to route the call. Valid values are default,
emergency, and FQDN. FQDN is treated the same as default proxy.
This entry is not case sensitive.
User-specific dial tone. If no tone is specified, the default secondary
dial tone plays. If a comma (,) is specified followed by a tone, the
phone plays the indicated tone instead of the secondary dial tone. If
a tone is specified but there is no comma, the tone is ignored.
You can specify up to three different secondary dial tones in a single
dial-plan template. The tones play in the order in which they appear
in the template. Multiple tone entries are condensed into a single
comma. For example, the phone interprets the match string
as
and treats the three commas as a single comma.
9,234
TIMEOUT="0" User="Phone"/> <!-- Match '#' -->
TIMEOUT="15" User="Phone"/>
Chapter 3
Initializing Cisco Unified IP Phones
9,,,234
OL-7890-01