Cisco 7940G Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 7940G. Cisco 7940G 10 páginas. Ios telephony services ip phone
También para Cisco 7940G: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Manual (35 páginas), Referencia rápida (2 páginas), Manual del usuario (15 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual del teléfono (17 páginas), Manual del administrador (15 páginas), Manual del usuario (16 páginas), Manual de referencia (24 páginas), Manual de administración (29 páginas), Manual (21 páginas), Manual de instalación (12 páginas)

Imprimir página

Chapter 1

Cisco IP Phone 7960G and Cisco IP Phone 7940G for Cisco IOS Telephony Services

Forward All Calls

To forward all incoming calls to another number, perform the following steps:

Press the CFwdALL soft key. You will hear a confirmation beep.

Step 1

Step 2

Dial the number to which you want to forward all your calls. Dial the number exactly as you would if

you were placing a call to that number. Remember to include locally required prefix numbers.

The phone display will be updated to show that calls are to be forwarded.

Step 3

Press the pound key (#) or the EndCall soft key.

To cancel call forwarding:

•

Press the CFwdALL soft key.

The soft-key and button sequence of CFwdALL soft key plus the Messages button will forwards calls

Note

to voice-mail.

The CFwdALL soft key plus a speed-dial button will forward calls to a speed dial number.

Pick Up Calls

To pick up a call that is on hold, or a call that is ringing at another extension, perform the following steps:

Press the PickUp soft key.

Step 1

Dial the extension number of the Cisco IP phone that you want to pick up.

Step 2

Control of the call will be transferred to your phone.

To selectively pick up a call coming in to a number that is shared by a group, perform the following steps:

Press the GPickUp soft key.

Step 1

Dial the number shared by the group whose incoming call you want to pick up. If there is only one pickup

Step 2

group defined in the entire ITS system, you only need to press the GPickUp soft key.

Control of the call will be transferred to your phone.

Place a Conference Call

To place a conference, call perform the following steps:

During a call, press the More soft key and then the Confrn soft key to open a new line and put the first

Step 1

party on hold.

Place a call to another number.

Step 2

When the call connects, press Confrn again to add the new party to the call.

Step 3

To add another party to the conference call, press the Confrn soft key to obtain a new line. The other

Step 4

parties are automatically placed on hold.

78-15706-01

Cisco IOS Telephony Services IP Phone User Guide, Version 3.0

1-7