Cisco 7940G Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 7940G. Cisco 7940G 10 páginas. Ios telephony services ip phone
También para Cisco 7940G: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Manual (35 páginas), Referencia rápida (2 páginas), Manual del usuario (15 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual del teléfono (17 páginas), Manual del administrador (15 páginas), Manual del usuario (16 páginas), Manual de referencia (24 páginas), Manual de administración (29 páginas), Manual (21 páginas), Manual de instalación (12 páginas)

Imprimir página

Dial the number of the next party you want to add to the conference call.

Step 5

Repeat Steps 3 through 5 to connect additional callers.

Step 6

Note

Place a Call from Your Local Directory

To access the local phone directory established by the system administrator, perform the following steps:

Press the Directories button.

Step 1

Press the Navigation Up or Down button to select the local directory.

Step 2

Press the Navigation Up or Down button to select the Last, First, or Number field search option.

Step 3

Using the dial pad, enter the last name or first name for the entry.

Step 4

When entering letters, select the appropriate number key of the letter you want, and press that key a

number of times that equals the position of the target letter. For example, to enter a B, press the 2 key

two times, and to enter a C, press the 2 key three times. Use the backspace (<<) soft key to erase

characters that were entered incorrectly.

Step 5

Press the Search soft key to find your selection.

If your search results in multiple listings, use the Navigation Up or Down button to select the correct

Step 6

number.

Step 7

Press the Dial soft key to dial the selected number.

Program Personal Speed-Dial Buttons

Once an administrator has defined one or more speed-dial instances for a Cisco IP phone, you can

reprogram numbers that are not locked or can program numbers into an instance that has an empty dial

string by following these steps:

Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a

Step 1

line button. Listen for the dial tone.

Press the pound key (#).

Step 2

Press the speed-dial button that you want to program. A short beep confirms that you are starting to

Step 3

program this button.

Enter the speed-dial number. The digits will appear on the phone display. When you are entering

Step 4

speed-dial numbers on a Cisco IP Phone 7960G, use the backspace (<<) soft key to erase digits that were

entered incorrectly.

To remove a speed-dial number without replacing it with a new one, press the pound key (#).

Step 5

Press the same speed-dial button a second time to indicate that you have finished entering the speed-dial

digits and to store the new speed-dial number.

Step 6

Hang up the handset, or press a new speed-dial button and repeat the process.

Cisco IOS Telephony Services IP Phone User Guide, Version 3.0

1-8

Chapter 1

When the call originator disconnects, additional parties cannot join the call in progress.

Cisco IP Phone 7960G and Cisco IP Phone 7940G for Cisco IOS Telephony Services

78-15706-01