Epson BrightLink 450Wi - Interactive Projector Utilizando

Navegue en línea o descargue pdf Utilizando para Proyector Epson BrightLink 450Wi - Interactive Projector. Epson BrightLink 450Wi - Interactive Projector 4 páginas. Remote control information
También para Epson BrightLink 450Wi - Interactive Projector: Manual Start Here (6 páginas), Folleto y especificaciones (18 páginas), Instalación (5 páginas), Plantilla de montaje (1 páginas), Dibujo acotado (2 páginas), Plantilla de montaje (5 páginas), Manual del usuario (25 páginas), Manual de inicio rápido (2 páginas), Folleto y especificaciones (18 páginas), Manual de instalación (10 páginas)

Using the Wall-Mounting Cable Management Kit

Follow these instructions to install the cable management channels on your wall and place the cables in the

channels.

The Wall-Mounting Cable Management Kit includes the parts shown below:

18-inch-long channel

(1 piece)

Plan your cable management layout, referring to the illustration below. If you want to connect two 4-foot

channels together (end-to-end), use a seam cover where the channels meet. Use the small connector pieces

to turn corners. Use a hacksaw to cut the channels and channel covers to desired lengths.

Tip

When using a hacksaw, cut the plastic slowly to maintain smooth edges.

Note

The example shown below is for a typical installation, but yours may vary. For example, if the computer is on the right

side of the screen, you should attach the channels to the wall on the right side instead of the left.

Seam

cover

4-foot-long channels

(4 pieces)

Corner connector

(3 pieces)

Drywall screws

(100 pieces)

Seam cover

(10 pieces)

Corner

connector