Epson BrightLink 450Wi - Interactive Projector 사용

{카테고리_이름} Epson BrightLink 450Wi - Interactive Projector에 대한 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 450Wi - Interactive Projector 4 페이지. Remote control information
Epson BrightLink 450Wi - Interactive Projector에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지), 브로셔 및 사양 (18 페이지), 설치 (5 페이지), 마운팅 템플릿 (1 페이지), 치수 도면 (2 페이지), 마운팅 템플릿 (5 페이지), 사용자 설명서 (25 페이지), 빠른 시작 매뉴얼 (2 페이지), 브로셔 및 사양 (18 페이지), 설치 핸드북 (10 페이지)

Using the Wall-Mounting Cable Management Kit

Follow these instructions to install the cable management channels on your wall and place the cables in the

channels.

The Wall-Mounting Cable Management Kit includes the parts shown below:

18-inch-long channel

(1 piece)

Plan your cable management layout, referring to the illustration below. If you want to connect two 4-foot

channels together (end-to-end), use a seam cover where the channels meet. Use the small connector pieces

to turn corners. Use a hacksaw to cut the channels and channel covers to desired lengths.

Tip

When using a hacksaw, cut the plastic slowly to maintain smooth edges.

Note

The example shown below is for a typical installation, but yours may vary. For example, if the computer is on the right

side of the screen, you should attach the channels to the wall on the right side instead of the left.

Seam

cover

4-foot-long channels

(4 pieces)

Corner connector

(3 pieces)

Drywall screws

(100 pieces)

Seam cover

(10 pieces)

Corner

connector