Siemens EF6 Series Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Placa Siemens EF6 Series. Siemens EF6 Series 12 páginas.
También para Siemens EF6 Series: Manual de instrucciones (12 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (16 páginas), Manual del usuario (12 páginas)
Imprimir página
Changing the basic settings
The hob must be switched off.
Switch on the front left hotplate
1.
Within the next 10 seconds, touch the
2.
4 seconds.
PLQ ORZ
PLQ ORZ
™‚
appears on the left-hand display and
display.
Touch the
symbol repeatedly until the desired symbol
æ
3.
appears on the left-hand display.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Rectifying faults
Malfunctions often have simple explanations. Please read the
following notes before calling the aftersales service.
Indicator
Fault
Blank
There is no power supply.
The controls are damp or an object is
is flash-
"
resting on them.
ing
Electronic fault.
"§
+
number
The electronics have overheated and
"ƒ
have switched off the corresponding
hotplate.
The electronics have overheated and
"...
have switched off all hotplates.
* Do not place hot pans close to or on the control panel
10
at heat setting 1.
"
symbol for
æ
PHG PD[
PHG PD[
6
‹
on the right-hand
Action
Check the household fuse for the appliance. Check whether there is a power
cut by trying other electronic appliances.
Dry the controls or remove the object.
Switch the appliance off and back on again after about 30 seconds using
either the household fuse or the circuit breaker in the fuse box. Contact the
after-sales service if this appears on the display again.
Wait until the electronics have cooled down sufficiently. Then touch a control
for the hotplate.*
Wait until the electronics have cooled down sufficiently. Then touch any con-
trol.*
Touch the S symbol repeatedly until the desired setting
4.
appears in the right-hand display.
PLQ ORZ
PLQ ORZ
Touch the
symbol for 4 seconds.
æ
5.
The setting is activated.
Switch off the hotplate.
6.
Exit the basic settings without making any modifications
Switch off the hob and reset.
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
■
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, please observe the
following instructions:
Use only warm, soapy water.
■
Do not use harsh or abrasive agents.
■
Do not use the glass scraper.
■
PHG PD[
PHG PD[
6