Siemens EF6 Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens EF6 Series. Siemens EF6 Series 12 stron.
Również dla Siemens EF6 Series: Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (16 strony), Podręcznik użytkownika (12 strony)

Drukuj stronę

Changing the basic settings

The hob must be switched off.

Switch on the front left hotplate

Within the next 10 seconds, touch the

4 seconds.

PLQ ORZ

™‚

appears on the left-hand display and

display.

Touch the

symbol repeatedly until the desired symbol

appears on the left-hand display.

Cleaning and care

The information in this section provides help on how best to

care for your hob.

Suitable maintenance and cleaning products can be purchased

from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from

burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for ceramic. Follow

the cleaning instructions on the packaging.

Never use:

Undiluted washing-up liquid

■

Detergent intended for dishwashers

■

Scouring agents

■

Rectifying faults

Malfunctions often have simple explanations. Please read the

following notes before calling the aftersales service.

Indicator

Fault

Blank

There is no power supply.

The controls are damp or an object is

is flash-

resting on them.

ing

Electronic fault.

"§

number

The electronics have overheated and

"ƒ

have switched off the corresponding

hotplate.

The electronics have overheated and

"...

have switched off all hotplates.

* Do not place hot pans close to or on the control panel

at heat setting 1.

symbol for

PHG PD[

‹

on the right-hand

Action

Check the household fuse for the appliance. Check whether there is a power

cut by trying other electronic appliances.

Dry the controls or remove the object.

Switch the appliance off and back on again after about 30 seconds using

either the household fuse or the circuit breaker in the fuse box. Contact the

after-sales service if this appears on the display again.

Wait until the electronics have cooled down sufficiently. Then touch a control

for the hotplate.*

Wait until the electronics have cooled down sufficiently. Then touch any con-

trol.*

Touch the S symbol repeatedly until the desired setting

appears in the right-hand display.

PLQ ORZ

Touch the

symbol for 4 seconds.

The setting is activated.

Switch off the hotplate.

Exit the basic settings without making any modifications

Switch off the hob and reset.

Harsh cleaning agents such as oven spray or stain remover

■

Abrasive sponges

■

High-pressure cleaners or steam jet cleaners

■

Ground-in dirt can be best removed with a glass scraper,

available from retailers. Please note the manufacturer's

instructions.

You can also obtain a suitable glass scraper from our after-

sales service or from the e-Shop.

Hob surround

To prevent damage to the hob surround, please observe the

following instructions:

Use only warm, soapy water.

■

Do not use harsh or abrasive agents.

■

Do not use the glass scraper.

■

PHG PD[