Epson CO-W01 Configuración rápida

Navegue en línea o descargue pdf Configuración rápida para Proyector Epson CO-W01. Epson CO-W01 4 páginas.

Imprimir página

CO-W01

Quick Setup

Before using the projector, make sure you read these instructions and the safety

instructions in the online User's Guide.

Contents

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface or attach it to a tripod or

other hardware with an optional mount. See the online User's Guide for more

information.

Connect the projector

Video device or computer

You can connect video equipment or a computer. Connect one end of an HDMI

cable to the projector's HDMI port and the other end to an HDMI port on your

video device or computer. See the online User's Guide for details.

Caution: Do not turn on the video source before connecting it to the projector;

you may damage the projector.

USB device

You can connect a supported digital camera, USB flash drive, or USB storage

device to the projector's USB-A port, and then use the projector's PC Free

feature. See the online User's Guide for details.

Streaming media player

You can connect a streaming media player (not included) to your projector.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The status light blinks, then remains lit for a few

seconds before turning off.

HDMI cable

USB cable

Insert the batteries into the remote control.

Press the

power button on the projector or the remote control. The

status light flashes blue and then stays on.

If you connected an active source, the projector displays the source.

Otherwise, the Home screen is displayed. If necessary, select the active

source to display the image. Press the

Home screen.

The default language of the menu system is English. To select another

language, press the

menu button on the remote control. Use the

directional pad and enter button to select Extended > Language, then

select your language. Press the

Note: To shut down the projector, press the

Adjust the image

Make sure the projector is turned on and displaying an image.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips.

To reduce or enlarge the image, press the

control. Use the directional pad and enter button to select Settings >

Installation > Zoom. Press left or right on the directional pad to adjust

the image size. Press the

To adjust the image height, press and hold the foot release lever on the

bottom of the projector to extend the front adjustable foot. Release the

lever to lock the foot in the desired position.

Move the focus lever on top of the projector left or right to adjust the

image sharpness.

If your image looks like

off to one side of the screen at an angle. Place the projector directly in

front of the center of the screen, facing the screen squarely. If you can't

move the projector, use the

correct the image shape.

If your image looks like

remote control and adjust the V-Keystone setting to correct it.

Note: For more adjustment methods, see the online User's Guide.

home button to return to the

menu button to exit the menu system.

power button twice.

menu button on the remote

menu button to exit the menu system.

, you may have placed the projector

keystone button on the remote control to

, press the

keystone button on the