Cisco 8841 Manual del usuario - Página 22

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 8841. Cisco 8841 30 páginas. Mpp phones
También para Cisco 8841: Notas de publicación (24 páginas), Manual del usuario (16 páginas), Manual de consulta rápida (7 páginas), Características (16 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual de consulta rápida (2 páginas), Manual rápido (2 páginas), Manual de consulta rápida (6 páginas), Manual del usuario (24 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (29 páginas), Manual (44 páginas), Manual de inicio rápido (2 páginas), Manual abreviado (2 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (6 páginas), Manual (22 páginas), Primeros pasos (2 páginas), Manual de inicio rápido (2 páginas), Manual (48 páginas), Manual del usuario (40 páginas), Inicio rápido (2 páginas)

Imprimir página

You can also add other dialed digits to the number. Examples of additional digits include a meeting

access code,

an extension, a voicemail password, an authorization code, and a billing code. The dial

string can contain the

• 0 to 9

• Pound (#)

• Asterisk (*)

• Comma (,)—This is the pause character, and gives a 2- second delay in the dialing. You can

have

The rules for

• Use the comma to separate the parts of the dial string.

• An authorization code must always precede a billing code in the speed-dial string.

• A single comma is required between the authorization code and the billing code in the

string.

• A speed-dial label is required for speed dials with authorization codes and additional

digits.

Before you configure the speed dial, try to dial the digits manually at least once to ensure that

the digit sequence

Note: Your phone does not save the authorization code, billing code, or extra digits from the speed dial

in the call

history. If you press Redial after you connect to a speed-dial destination, the phone prompts

you to enter any

Example

To set up a speed-dial number to call a person at a specific extension, and if you need an

authorization code and

• You need to dial 9 for an outside line.

• You want to call 5556543.

• You need to input the authorization code 1234.

• You need to input the billing code 9876.

• You must wait for 4 seconds.

• After the call connects, you must dial the extension 56789#.

In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.

Recent Calls

Recent Calls List

Use the Recents list to see the 180 most recent individual calls and call groups.

If your Recents list reaches the maximum size, the next new entry overwrites the oldest entry in the list.

If you have missed calls, the phone shows the number of missed calls for the line on the main screen (up to

99 missed calls). To clear the number from the line, you view your Recents list.

The missed calls number that displays on the main screen may differ from the actual number of calls in the

missed calls list. Some missed calls may have been removed from the list by the phone because you have more

than 180 entries in the Recents list.

22 |

P a g e

following characters:

several commas in a row. For example, two commas (,,) represent a pause of 4 seconds.

dial strings are:

is correct.

required authorization code, billing code, or additional digits manually.

billing code, consider the following requirements:

Cisco IP Phone 8800 Series User Guide

CHAPTER