Cisco 8851 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 8851. Cisco 8851 15 páginas. Mpp
También para Cisco 8851: Notas de publicación (24 páginas), Manual del usuario (16 páginas), Manual de consulta rápida (7 páginas), Características (16 páginas), Manual de inicio rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual rápido (2 páginas), Manual del usuario (24 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (28 páginas), Manual maestro de migración de firmware (31 páginas), Manual del usuario (30 páginas), Manual del usuario (29 páginas), Manual (44 páginas), Manual (13 páginas), Manual (14 páginas), Manual de inicio rápido (2 páginas), Manual de instalación (39 páginas), Manual (5 páginas), Manual de inicio rápido (2 páginas), Manual abreviado (2 páginas), Manual de consulta rápida (3 páginas), Manual del usuario (11 páginas), Manual de inicio rápido (2 páginas), Manual de reconfiguración (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (6 páginas), Manual (22 páginas), Manual (22 páginas), Manual de inicio rápido (2 páginas), Primeros pasos (2 páginas), Manual (48 páginas), Manual del usuario (40 páginas), Manual de consulta rápida (7 páginas), Inicio rápido (2 páginas), Manual de consulta rápida (8 páginas)

CALL BASICS

You can place a call using any of the following methods:

1. Lift the receiver and dial

2. Hit the Speakerphone

3. Hit the New call Soft Key and dial

You can end a call using any of the following methods:

1. Hang up the receiver

2. Hit the End call Soft Key

3. Hit the red Hang Up button

On-Campus Call – Dial the 4 digit extension of the other party

Local Call – Dial 9 followed by the 7-digit number of the other party

Long Distance Call – Dial 9, then 1, then the area code and phone number of the other party. You will then be prompted to enter

your long distance code (screen shows "Enter Authorization Code") followed by the # key. After doing so, your call will be

connected.

International Call - Dial 9, then 011, then the country code, area code, and phone number of the other party. You will then be

prompted to enter your long distance code (screen shows "Enter Authorization Code") followed by the # key. After doing so, your

call will be connected if you have been granted international dialing privileges.

Emergency Call – Dial either 911 or 9 followed by 911 to connect with your local 911 dispatch center.

You place a call on hold using any of the following methods:

1. Push the Hold

2. Push the Hold Soft Key

You can resume a call on hold using any of the following methods:

1. Push the Hold

2. Push the Resume Soft Key

Hit the "More" Soft Key (...) and then the Park Soft Key

When you park a call, you will be notified which extension is holding the call (for example, the screen will say "Parked at 1850".)

Anyone can retrieve a parked call by simply dialing the park number (for example, 1850) from any phone on the Cisco phone system.

When your phone is ringing, you will have a Soft Key option called Decline. Hitting this Soft Key immediately directs the call to

voicemail. This is similar to hitting "ignore" on most cell phones.

CISCO PHONE GUIDE 8851

button and dial

Button

| Rev 5 - 3/2016

TIP: Dial * and then the on-

campus extension to go directly

to a user's voicemail.